1 files changed, 0 insertions, 232 deletions
diff --git a/extns/impl/hal_nxpnfc.h b/extns/impl/hal_nxpnfc.h
deleted file mode 100644
index d1ab289..0000000
--- a/extns/impl/hal_nxpnfc.h
+++ /dev/null
@@ -1,232 +0,0 @@
-/******************************************************************************
- *
- *  Copyright 2018-2019 NXP
- *
- *  Licensed under the Apache License, Version 2.0 (the "License");
- *  you may not use this file except in compliance with the License.
- *  You may obtain a copy of the License at
- *
- *  http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software
- *  distributed under the License is distributed on an "AS IS" BASIS,
- *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- *  See the License for the specific language governing permissions and
- *  limitations under the License.
- *
- ******************************************************************************/
-#ifndef ANDROID_HARDWARE_HAL_NXPNFC_V1_0_H
-#define ANDROID_HARDWARE_HAL_NXPNFC_V1_0_H
-#include <vector>
-#include <string>
-
-#define NFC_NCI_NXP_PN54X_HARDWARE_MODULE_ID "nfc_nci.pn54x"
-#define MAX_IOCTL_TRANSCEIVE_CMD_LEN 256
-#define MAX_IOCTL_TRANSCEIVE_RESP_LEN 256
-#define MAX_ATR_INFO_LEN 128
-
-enum {
-    HAL_NFC_ENABLE_I2C_FRAGMENTATION_EVT = 0x08,
-    HAL_NFC_POST_MIN_INIT_CPLT_EVT       = 0x09,
-    HAL_NFC_WRITE_COMPLETE = 0x0A
-};
-
-enum {
-  HAL_NFC_IOCTL_P61_IDLE_MODE = 0,
-  HAL_NFC_IOCTL_P61_WIRED_MODE,
-  HAL_NFC_IOCTL_P61_PWR_MODE,
-  HAL_NFC_IOCTL_GET_CONFIG_INFO,
-  HAL_NFC_IOCTL_NCI_TRANSCEIVE,
-  HAL_NFC_SET_SPM_PWR,
-  HAL_NFC_IOCTL_REL_SVDD_WAIT,
-  HAL_NFC_IOCTL_SPI_DWP_SYNC,
-  HAL_NFC_IOCTL_SET_NFC_SERVICE_PID,
-  HAL_NFC_IOCTL_REL_DWP_WAIT,
-  HAL_NFC_IOCTL_GET_FEATURE_LIST,
-  HAL_NFC_SET_POWER_SCHEME,
-  HAL_NFC_GET_SPM_STATUS,
-  HAL_NFC_GET_NXP_CONFIG,
-  HAL_NFC_IOCTL_RF_ACTION_NTF,
-  HAL_NFC_IOCTL_SET_TRANSIT_CONFIG,
-  HAL_NFC_IOCTL_ESE_JCOP_DWNLD,
-  HAL_NFC_IOCTL_ESE_UPDATE_COMPLETE,
-  HAL_NFC_IOCTL_HCI_INIT_STATUS_UPDATE,
-  HAL_NFC_IOCTL_HCI_INIT_STATUS_UPDATE_COMPLETE /* 28 */
-};
-
-/*
- * Data structures provided below are used of Hal Ioctl calls
- */
-/*
- * nfc_nci_ExtnCmd_t shall contain data for commands used for transceive command
- * in ioctl
- */
-typedef struct {
-  uint16_t cmd_len;
-  uint8_t p_cmd[MAX_IOCTL_TRANSCEIVE_CMD_LEN];
-} nfc_nci_ExtnCmd_t;
-
-/*
- * nxp_nfc_scrResetEmvcoCmd_t shall contain core set conf command to reset EMVCO
- * mode and the length of the command
- */
-typedef struct {
-  long len;
-  uint8_t cmd[10];
-} nxp_nfc_scrResetEmvcoCmd_t;
-
-/*
- * nfc_nci_ExtnRsp_t shall contain response for command sent in transceive
- * command
- */
-typedef struct {
-  uint8_t ese_listen_tech_mask;
-  uint8_t default_nfcee_disc_timeout;
-  uint8_t default_nfcee_timeout;
-  uint8_t ese_wired_prt_mask;
-  uint8_t uicc_wired_prt_mask;
-  uint8_t wired_mode_rf_field_enable;
-  uint8_t aid_block_route;
-
-  uint8_t esePowerDhControl;
-  uint8_t tagOpTimeout;
-  uint8_t loaderServiceVersion;
-  uint8_t defaultNfceeDiscTimeout;
-  uint8_t dualUiccEnable;
-  uint8_t ceRouteStrictDisable;
-  uint32_t osDownloadTimeoutValue;
-  uint8_t defaultAidRoute;
-  uint8_t defaultAidPwrState;
-  uint8_t defaultRoutePwrState;
-  uint8_t defaultOffHostPwrState;
-  uint8_t jcopDlAtBootEnable;
-  uint8_t defaultNfceeTimeout;
-  uint8_t nxpNfcChip;
-  uint8_t coreScrnOffAutonomousEnable;
-  uint8_t p61LsDefaultInterface;
-  uint8_t p61JcopDefaultInterface;
-  uint8_t agcDebugEnable;
-  uint8_t felicaCltPowerState;
-  uint32_t cmdRspTimeoutValue;
-  uint8_t checkDefaultProtoSeId;
-  uint8_t nfccPassiveListenTimeout;
-  uint32_t nfccStandbyTimeout;
-  uint32_t wmMaxWtxCount;
-  uint32_t nfccRfFieldEventTimeout;
-  uint8_t allowWiredInMifareDesfireClt;
-  uint8_t dwpIntfResetEnable;
-  uint8_t nxpLogHalLoglevel;
-  uint8_t nxpLogExtnsLogLevel;
-  uint8_t nxpLogTmlLogLevel;
-  uint8_t nxpLogFwDnldLogLevel;
-  uint8_t nxpLogNcixLogLevel;
-  uint8_t nxpLogNcirLogLevel;
-  uint8_t scrCfgFormat;
-  uint8_t etsiReaderEnable;
-  uint8_t techAbfRoute;
-  uint8_t techAbfPwrState;
-  uint8_t wTagSupport;
-  uint8_t t4tNfceePwrState;
-  nxp_nfc_scrResetEmvcoCmd_t scrResetEmvco;
-} nxp_nfc_config_t;
-/*
- * nfc_nci_ExtnRsp_t shall contain response for command sent in transceive
- * command
- */
-typedef struct {
-  uint16_t rsp_len;
-  uint8_t p_rsp[MAX_IOCTL_TRANSCEIVE_RESP_LEN];
-} nfc_nci_ExtnRsp_t;
-/*
- * TransitConfig_t shall contain transit config value and transit
- * Configuration length
- */
-typedef struct {
-  long len;
-  char *val;
-} TransitConfig_t;
-/*
- * InputData_t :ioctl has multiple subcommands
- * Each command has corresponding input data which needs to be populated in this
- */
-typedef union {
-  uint16_t bootMode;
-  uint8_t halType;
-  nfc_nci_ExtnCmd_t nciCmd;
-  uint32_t timeoutMilliSec;
-  long nfcServicePid;
-  TransitConfig_t transitConfig;
-} InputData_t;
-/*
- * nfc_nci_ExtnInputData_t :Apart from InputData_t, there are context data
- * which is required during callback from stub to proxy.
- * To avoid additional copy of data while propagating from libnfc to Adaptation
- * and Nfcstub to ncihal, common structure is used. As a sideeffect, context
- * data
- * is exposed to libnfc (Not encapsulated).
- */
-typedef struct {
-  /*context to be used/updated only by users of proxy & stub of Nfc.hal
-  * i.e, NfcAdaptation & hardware/interface/Nfc.
-  */
-  void* context;
-  InputData_t data;
-  uint8_t data_source;
-  long level;
-} nfc_nci_ExtnInputData_t;
-
-/*
- * outputData_t :ioctl has multiple commands/responses
- * This contains the output types for each ioctl.
- */
-typedef union {
-  uint32_t status;
-  nfc_nci_ExtnRsp_t nciRsp;
-  uint8_t nxpNciAtrInfo[MAX_ATR_INFO_LEN];
-  uint32_t p61CurrentState;
-  uint16_t fwUpdateInf;
-  uint16_t fwDwnldStatus;
-  uint16_t fwMwVerStatus;
-  uint8_t chipType;
-  nxp_nfc_config_t nxpConfigs;
-} outputData_t;
-
-/*
- * nfc_nci_ExtnOutputData_t :Apart from outputData_t, there are other
- * information
- * which is required during callback from stub to proxy.
- * For ex (context, result of the operation , type of ioctl which was
- * completed).
- * To avoid additional copy of data while propagating from libnfc to Adaptation
- * and Nfcstub to ncihal, common structure is used. As a sideeffect, these data
- * is exposed(Not encapsulated).
- */
-typedef struct {
-  /*ioctlType, result & context to be used/updated only by users of
-   * proxy & stub of Nfc.hal.
-   * i.e, NfcAdaptation & hardware/interface/Nfc
-   * These fields shall not be used by libnfc or halimplementation*/
-  uint64_t ioctlType;
-  uint32_t result;
-  void* context;
-  outputData_t data;
-} nfc_nci_ExtnOutputData_t;
-
-/*
- * nfc_nci_IoctlInOutData_t :data structure for input & output
- * to be sent for ioctl command. input is populated by client/proxy side
- * output is provided from server/stub to client/proxy
- */
-typedef struct {
-  nfc_nci_ExtnInputData_t inp;
-  nfc_nci_ExtnOutputData_t out;
-} nfc_nci_IoctlInOutData_t;
-
-enum NxpNfcHalStatus {
-    /** In case of an error, HCI network needs to be re-initialized */
-    HAL_NFC_STATUS_RESTART = 0x30,
-    HAL_NFC_HCI_NV_RESET = 0x40,
-    HAL_NFC_CONFIG_ESE_LINK_COMPLETE = 0x50
-};
-
-#endif  // ANDROID_HARDWARE_HAL_NXPNFC_V1_0_H