2 files changed, 440 insertions, 0 deletions
diff --git a/PREUPLOAD.cfg b/PREUPLOAD.cfg
index 6b7fd7137..706dfa819 100644
--- a/PREUPLOAD.cfg
+++ b/PREUPLOAD.cfg
@@ -1,2 +1,3 @@
 [Builtin Hooks]
 clang_format = true
+pylint = true
diff --git a/pylintrc b/pylintrc
new file mode 100644
index 000000000..f83f8c6d9
--- /dev/null
+++ b/pylintrc
@@ -0,0 +1,439 @@
+# Copyright 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+[MASTER]
+
+# Specify a configuration file.
+#rcfile=
+
+# Python code to execute, usually for sys.path manipulation such as
+# pygtk.require().
+#init-hook=
+
+# Profiled execution.
+profile=no
+
+# Add files or directories to the blacklist. They should be base names, not
+# paths.
+ignore=CVS,.svn,.git
+
+# Pickle collected data for later comparisons.
+persistent=yes
+
+# List of plugins (as comma separated values of python modules names) to load,
+# usually to register additional checkers.
+load-plugins=
+
+# Use multiple processes to speed up Pylint.
+jobs=1
+
+# Allow loading of arbitrary C extensions. Extensions are imported into the
+# active Python interpreter and may run arbitrary code.
+unsafe-load-any-extension=no
+
+# A comma-separated list of package or module names from where C extensions may
+# be loaded. Extensions are loading into the active Python interpreter and may
+# run arbitrary code
+extension-pkg-whitelist=
+
+# Allow optimization of some AST trees. This will activate a peephole AST
+# optimizer, which will apply various small optimizations. For instance, it can
+# be used to obtain the result of joining multiple strings with the addition
+# operator. Joining a lot of strings can lead to a maximum recursion error in
+# Pylint and this flag can prevent that. It has one side effect, the resulting
+# AST will be different than the one from reality.
+optimize-ast=no
+
+
+[MESSAGES CONTROL]
+
+# List of checkers and warnings to enable.
+enable=old-raise-syntax
+
+# Only show warnings with the listed confidence levels. Leave empty to show
+# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
+confidence=
+
+# Enable the message, report, category or checker with the given id(s). You can
+# either give multiple identifier separated by comma (,) or put this option
+# multiple time. See also the "--disable" option for examples.
+#enable=
+
+# Disable the message, report, category or checker with the given id(s). You
+# can either give multiple identifiers separated by comma (,) or put this
+# option multiple times (only on the command line, not in the configuration
+# file where it should appear only once).You can also use "--disable=all" to
+# disable everything first and then reenable specific checks. For example, if
+# you want to run only the similarities checker, you can use "--disable=all
+# --enable=similarities". If you want to run only the classes checker, but have
+# no Warning level messages displayed, use"--disable=all --enable=classes
+# --disable=W"
+# We leave many of the style warnings to judgement/peer review.
+disable=
+    fixme,
+    locally-disabled,
+    locally-enabled,
+    no-self-use,
+    star-args,
+    too-few-public-methods,
+    too-many-arguments,
+    too-many-branches,
+    too-many-instance-attributes,
+    too-many-lines,
+    too-many-locals,
+    too-many-public-methods,
+    too-many-return-statements,
+    too-many-statements,
+
+
+[REPORTS]
+
+# Set the output format. Available formats are text, parseable, colorized, msvs
+# (visual studio) and html. You can also give a reporter class, eg
+# mypackage.mymodule.MyReporterClass.
+output-format=text
+
+# Put messages in a separate file for each module / package specified on the
+# command line instead of printing them on stdout. Reports (if any) will be
+# written in a file name "pylint_global.[txt|html]".
+files-output=no
+
+# Tells whether to display a full report or only the messages
+reports=no
+
+# Python expression which should return a note less than 10 (10 is the highest
+# note). You have access to the variables errors warning, statement which
+# respectively contain the number of errors / warnings messages and the total
+# number of statements analyzed. This is used by the global evaluation report
+# (RP0004).
+#evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
+
+# Template used to display messages. This is a python new-style format string
+# used to format the message information. See doc for all details
+#msg-template=
+
+
+[SIMILARITIES]
+
+# Minimum lines number of a similarity.
+min-similarity-lines=20
+
+# Ignore comments when computing similarities.
+ignore-comments=yes
+
+# Ignore docstrings when computing similarities.
+ignore-docstrings=yes
+
+# Ignore imports when computing similarities.
+ignore-imports=no
+
+
+[TYPECHECK]
+
+# Tells whether missing members accessed in mixin class should be ignored. A
+# mixin class is detected if its name ends with "mixin" (case insensitive).
+ignore-mixin-members=yes
+
+# List of module names for which member attributes should not be checked
+# (useful for modules/projects where namespaces are manipulated during runtime
+# and thus existing member attributes cannot be deduced by static analysis. It
+# supports qualified module names, as well as Unix pattern matching.
+ignored-modules=
+
+# List of classes names for which member attributes should not be checked
+# (useful for classes with attributes dynamically set). This supports can work
+# with qualified names.
+ignored-classes=hashlib,numpy
+
+# List of members which are set dynamically and missed by pylint inference
+# system, and so shouldn't trigger E1101 when accessed. Python regular
+# expressions are accepted.
+generated-members=
+
+# List of decorators that create context managers from functions, such as
+# contextlib.contextmanager.
+contextmanager-decorators=contextlib.contextmanager,contextlib2.contextmanager
+
+
+[SPELLING]
+
+# Spelling dictionary name. Available dictionaries: none. To make it working
+# install python-enchant package.
+spelling-dict=
+
+# List of comma separated words that should not be checked.
+spelling-ignore-words=
+
+# A path to a file that contains private dictionary; one word per line.
+spelling-private-dict-file=
+
+# Tells whether to store unknown words to indicated private dictionary in
+# --spelling-private-dict-file option instead of raising a message.
+spelling-store-unknown-words=no
+
+
+[LOGGING]
+
+# Logging modules to check that the string format arguments are in logging
+# function parameter format
+logging-modules=logging
+
+
+[VARIABLES]
+
+# Tells whether we should check for unused import in __init__ files.
+init-import=no
+
+# A regular expression matching names used for dummy variables (i.e. not used).
+dummy-variables-rgx=^\*{0,2}(_$|unused_|dummy_)
+
+# List of additional names supposed to be defined in builtins. Remember that
+# you should avoid to define new builtins when possible.
+additional-builtins=
+
+# List of strings which can identify a callback function by name. A callback
+# name must start or end with one of those strings.
+callbacks=cb_,_cb
+
+
+[FORMAT]
+
+# Maximum number of characters on a single line.
+max-line-length=80
+
+# Allow the body of an if to be on the same line as the test if there is no
+# else.
+single-line-if-stmt=no
+
+# Regexp for a line that is allowed to be longer than the limit.
+# This "ignore" regex is today composed of 4 independent parts:
+# (1) Long import lines
+# (2) URLs in comments or pydocs. Detecting URLs by regex is a hard problem and
+#     no amount of tweaking will make a perfect regex AFAICT. This one is a good
+#     compromise.
+# (3) Constant string literals at the start of files don't need to be broken
+#     across lines. Allowing long paths, streamz and urls to be on a single
+#     line. Also requires that the string not be a triplequoted string.
+ignore-long-lines=(?x)
+  (^\s*(import|from)\s
+   |^\s*(\#\ )?<?(https?|ftp):\/\/[^\s\/$.?#].[^\s]*>?$
+   |^[a-zA-Z_][a-zA-Z0-9_]*\s*=\s*("[^"]\S+"|'[^']\S+')
+   )
+
+# Maximum number of lines in a module
+max-module-lines=99999
+
+# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
+# tab).
+indent-string='  '
+
+# Number of spaces of indent required inside a hanging  or continued line.
+indent-after-paren=4
+
+# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
+expected-line-ending-format=LF
+
+# Make sure : in dicts and trailing commas are checked for whitespace.
+no-space-check=
+
+
+[MISCELLANEOUS]
+
+# List of note tags to take in consideration, separated by a comma.
+notes=FIXME,XXX,TODO
+
+
+[BASIC]
+
+# Required attributes for module, separated by a comma
+required-attributes=
+
+# List of builtins function names that should not be used, separated by a comma
+bad-functions=map,filter,input,apply,reduce
+
+# Good variable names which should always be accepted, separated by a comma
+good-names=i,j,k,ex,x,_
+
+# Bad variable names which should always be refused, separated by a comma
+bad-names=foo,bar,baz,toto,tutu,tata
+
+# Colon-delimited sets of names that determine each other's naming style when
+# the name regexes allow several styles.
+name-group=
+
+# Include a hint for the correct naming format with invalid-name
+include-naming-hint=no
+
+# Regular expression which should only match correct function names.
+# 'camel_case' and 'snake_case' group names are used for consistency of naming
+# styles across functions and methods.
+function-rgx=^(?:(?P<camel_case>_?[A-Z][a-zA-Z0-9]*)|(?P<snake_case>_?[a-z][a-z0-9_]*))$
+
+# Naming hint for function names
+function-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression which should only match correct variable names
+variable-rgx=^[a-z][a-z0-9_]*$
+
+# Naming hint for variable names
+variable-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression which should only match correct module level names
+const-rgx=^(_?[A-Z][A-Z0-9_]*|__[a-z0-9_]+__|_?[a-z][a-z0-9_]*)$
+
+# Naming hint for constant names
+const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$
+
+# Regular expression which should only match correct instance attribute names
+attr-rgx=^_{0,2}[a-z][a-z0-9_]*$
+
+# Naming hint for attribute names
+attr-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression which should only match correct argument names
+argument-rgx=^[a-z][a-z0-9_]*$
+
+# Naming hint for argument names
+argument-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression which should only match correct class attribute
+class-attribute-rgx=^(_?[A-Z][A-Z0-9_]*|__[a-z0-9_]+__|_?[a-z][a-z0-9_]*)$
+
+# Naming hint for class attribute names
+class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
+
+# Regular expression which should only match correct list comprehension /
+# generator expression variable names
+inlinevar-rgx=^[a-z][a-z0-9_]*$
+
+# Naming hint for inline iteration names
+inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$
+
+# Regular expression which should only match correct class names
+class-rgx=^_?[A-Z][a-zA-Z0-9]*$
+
+# Naming hint for class names
+class-name-hint=[A-Z_][a-zA-Z0-9]+$
+
+# Regular expression which should only match correct module names. The
+# leading underscore is sanctioned for private modules by Google's style
+# guide.
+module-rgx=^(_?[a-z][a-z0-9_]*)|__init__$
+
+# Naming hint for module names
+module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
+
+# Regular expression which should only match correct method names.
+# 'camel_case' and 'snake_case' group names are used for consistency of naming
+# styles across functions and methods. 'exempt' indicates a name which is
+# consistent with all naming styles.
+method-rgx=^(?:(?P<exempt>__[a-z0-9_]+__|next)|(?P<camel_case>_{0,2}[A-Z][a-zA-Z0-9]*)|(?P<snake_case>_{0,2}[a-z][a-z0-9_]*))$
+
+# Naming hint for method names
+method-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression which should only match function or class names that do
+# not require a docstring.
+no-docstring-rgx=(__.*__|main)
+
+# Minimum line length for functions/classes that require docstrings, shorter
+# ones are exempt.
+docstring-min-length=10
+
+# List of decorators that define properties, such as abc.abstractproperty.
+property-classes=abc.abstractproperty
+
+
+[ELIF]
+
+# Maximum number of nested blocks for function / method body
+max-nested-blocks=5
+
+
+[DESIGN]
+
+# Maximum number of arguments for function / method
+max-args=5
+
+# Argument names that match this expression will be ignored. Default to name
+# with leading underscore
+ignored-argument-names=_.*
+
+# Maximum number of locals for function / method body
+max-locals=15
+
+# Maximum number of return / yield for function / method body
+max-returns=6
+
+# Maximum number of branch for function / method body
+max-branches=12
+
+# Maximum number of statements in function / method body
+max-statements=50
+
+# Maximum number of parents for a class (see R0901).
+max-parents=10
+
+# Maximum number of attributes for a class (see R0902).
+max-attributes=7
+
+# Minimum number of public methods for a class (see R0903).
+min-public-methods=2
+
+# Maximum number of public methods for a class (see R0904).
+max-public-methods=20
+
+# Maximum number of boolean expressions in a if statement
+max-bool-expr=5
+
+
+[CLASSES]
+
+# List of method names used to declare (i.e. assign) instance attributes.
+defining-attr-methods=__init__,__new__,setUp
+
+# List of valid names for the first argument in a class method.
+valid-classmethod-first-arg=cls
+
+# List of valid names for the first argument in a metaclass class method.
+valid-metaclass-classmethod-first-arg=mcs
+
+# List of member names, which should be excluded from the protected access
+# warning.
+exclude-protected=_asdict,_fields,_replace,_source,_make
+
+
+[IMPORTS]
+
+# Deprecated modules which should not be used, separated by a comma
+deprecated-modules=regsub,TERMIOS,Bastion,rexec,optparse
+
+# Create a graph of every (i.e. internal and external) dependencies in the
+# given file (report RP0402 must not be disabled)
+import-graph=
+
+# Create a graph of external dependencies in the given file (report RP0402 must
+# not be disabled)
+ext-import-graph=
+
+# Create a graph of internal dependencies in the given file (report RP0402 must
+# not be disabled)
+int-import-graph=
+
+
+[EXCEPTIONS]
+
+# Exceptions that will emit a warning when being caught. Defaults to
+# "Exception"
+overgeneral-exceptions=StandardError,Exception,BaseException