diff options
Diffstat (limited to 'share/doc/gdb/Remote-Configuration.html')
| -rw-r--r-- | share/doc/gdb/Remote-Configuration.html | 375 |
1 files changed, 375 insertions, 0 deletions
diff --git a/share/doc/gdb/Remote-Configuration.html b/share/doc/gdb/Remote-Configuration.html new file mode 100644 index 0000000..ac1a567 --- /dev/null +++ b/share/doc/gdb/Remote-Configuration.html @@ -0,0 +1,375 @@ +<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> +<html> +<!-- Copyright (C) 1988-2023 Free Software Foundation, Inc. + +Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.3 or +any later version published by the Free Software Foundation; with the +Invariant Sections being "Free Software" and "Free Software Needs +Free Documentation", with the Front-Cover Texts being "A GNU Manual," +and with the Back-Cover Texts as in (a) below. + +(a) The FSF's Back-Cover Text is: "You are free to copy and modify +this GNU Manual. Buying copies from GNU Press supports the FSF in +developing GNU and promoting software freedom." --> +<!-- Created by GNU Texinfo 5.1, http://www.gnu.org/software/texinfo/ --> +<head> +<title>Debugging with GDB: Remote Configuration</title> + +<meta name="description" content="Debugging with GDB: Remote Configuration"> +<meta name="keywords" content="Debugging with GDB: Remote Configuration"> +<meta name="resource-type" content="document"> +<meta name="distribution" content="global"> +<meta name="Generator" content="makeinfo"> +<meta http-equiv="Content-Type" content="text/html; charset=utf-8"> +<link href="index.html#Top" rel="start" title="Top"> +<link href="Concept-Index.html#Concept-Index" rel="index" title="Concept Index"> +<link href="index.html#SEC_Contents" rel="contents" title="Table of Contents"> +<link href="Remote-Debugging.html#Remote-Debugging" rel="up" title="Remote Debugging"> +<link href="Remote-Stub.html#Remote-Stub" rel="next" title="Remote Stub"> +<link href="Server.html#Server" rel="previous" title="Server"> +<style type="text/css"> +<!-- +a.summary-letter {text-decoration: none} +blockquote.smallquotation {font-size: smaller} +div.display {margin-left: 3.2em} +div.example {margin-left: 3.2em} +div.indentedblock {margin-left: 3.2em} +div.lisp {margin-left: 3.2em} +div.smalldisplay {margin-left: 3.2em} +div.smallexample {margin-left: 3.2em} +div.smallindentedblock {margin-left: 3.2em; font-size: smaller} +div.smalllisp {margin-left: 3.2em} +kbd {font-style:oblique} +pre.display {font-family: inherit} +pre.format {font-family: inherit} +pre.menu-comment {font-family: serif} +pre.menu-preformatted {font-family: serif} +pre.smalldisplay {font-family: inherit; font-size: smaller} +pre.smallexample {font-size: smaller} +pre.smallformat {font-family: inherit; font-size: smaller} +pre.smalllisp {font-size: smaller} +span.nocodebreak {white-space:nowrap} +span.nolinebreak {white-space:nowrap} +span.roman {font-family:serif; font-weight:normal} +span.sansserif {font-family:sans-serif; font-weight:normal} +ul.no-bullet {list-style: none} +--> +</style> + + +</head> + +<body lang="en" bgcolor="#FFFFFF" text="#000000" link="#0000FF" vlink="#800080" alink="#FF0000"> +<a name="Remote-Configuration"></a> +<div class="header"> +<p> +Next: <a href="Remote-Stub.html#Remote-Stub" accesskey="n" rel="next">Remote Stub</a>, Previous: <a href="Server.html#Server" accesskey="p" rel="previous">Server</a>, Up: <a href="Remote-Debugging.html#Remote-Debugging" accesskey="u" rel="up">Remote Debugging</a> [<a href="index.html#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="Concept-Index.html#Concept-Index" title="Index" rel="index">Index</a>]</p> +</div> +<hr> +<a name="Remote-Configuration-1"></a> +<h3 class="section">20.4 Remote Configuration</h3> + +<a name="index-set-remote"></a> +<a name="index-show-remote"></a> +<p>This section documents the configuration options available when +debugging remote programs. For the options related to the File I/O +extensions of the remote protocol, see <a href="system.html#system">system-call-allowed</a>. +</p> +<dl compact="compact"> +<dt><code>set remoteaddresssize <var>bits</var></code></dt> +<dd><a name="index-address-size-for-remote-targets"></a> +<a name="index-bits-in-remote-address"></a> +<p>Set the maximum size of address in a memory packet to the specified +number of bits. <small>GDB</small> will mask off the address bits above +that number, when it passes addresses to the remote target. The +default value is the number of bits in the target’s address. +</p> +</dd> +<dt><code>show remoteaddresssize</code></dt> +<dd><p>Show the current value of remote address size in bits. +</p> +</dd> +<dt><code>set serial baud <var>n</var></code></dt> +<dd><a name="index-baud-rate-for-remote-targets"></a> +<p>Set the baud rate for the remote serial I/O to <var>n</var> baud. The +value is used to set the speed of the serial port used for debugging +remote targets. +</p> +</dd> +<dt><code>show serial baud</code></dt> +<dd><p>Show the current speed of the remote connection. +</p> +</dd> +<dt><code>set serial parity <var>parity</var></code></dt> +<dd><p>Set the parity for the remote serial I/O. Supported values of <var>parity</var> are: +<code>even</code>, <code>none</code>, and <code>odd</code>. The default is <code>none</code>. +</p> +</dd> +<dt><code>show serial parity</code></dt> +<dd><p>Show the current parity of the serial port. +</p> +</dd> +<dt><code>set remotebreak</code></dt> +<dd><a name="index-interrupt-remote-programs"></a> +<a name="index-BREAK-signal-instead-of-Ctrl_002dC"></a> +<a name="set-remotebreak"></a><p>If set to on, <small>GDB</small> sends a <code>BREAK</code> signal to the remote +when you type <kbd>Ctrl-c</kbd> to interrupt the program running +on the remote. If set to off, <small>GDB</small> sends the ‘<samp>Ctrl-C</samp>’ +character instead. The default is off, since most remote systems +expect to see ‘<samp>Ctrl-C</samp>’ as the interrupt signal. +</p> +</dd> +<dt><code>show remotebreak</code></dt> +<dd><p>Show whether <small>GDB</small> sends <code>BREAK</code> or ‘<samp>Ctrl-C</samp>’ to +interrupt the remote program. +</p> +</dd> +<dt><code>set remoteflow on</code></dt> +<dt><code>set remoteflow off</code></dt> +<dd><a name="index-set-remoteflow"></a> +<p>Enable or disable hardware flow control (<code>RTS</code>/<code>CTS</code>) +on the serial port used to communicate to the remote target. +</p> +</dd> +<dt><code>show remoteflow</code></dt> +<dd><a name="index-show-remoteflow"></a> +<p>Show the current setting of hardware flow control. +</p> +</dd> +<dt><code>set remotelogbase <var>base</var></code></dt> +<dd><p>Set the base (a.k.a. radix) of logging serial protocol +communications to <var>base</var>. Supported values of <var>base</var> are: +<code>ascii</code>, <code>octal</code>, and <code>hex</code>. The default is +<code>ascii</code>. +</p> +</dd> +<dt><code>show remotelogbase</code></dt> +<dd><p>Show the current setting of the radix for logging remote serial +protocol. +</p> +</dd> +<dt><code>set remotelogfile <var>file</var></code></dt> +<dd><a name="index-record-serial-communications-on-file"></a> +<p>Record remote serial communications on the named <var>file</var>. The +default is not to record at all. +</p> +</dd> +<dt><code>show remotelogfile</code></dt> +<dd><p>Show the current setting of the file name on which to record the +serial communications. +</p> +</dd> +<dt><code>set remotetimeout <var>num</var></code></dt> +<dd><a name="index-timeout-for-serial-communications"></a> +<a name="index-remote-timeout"></a> +<p>Set the timeout limit to wait for the remote target to respond to +<var>num</var> seconds. The default is 2 seconds. +</p> +</dd> +<dt><code>show remotetimeout</code></dt> +<dd><p>Show the current number of seconds to wait for the remote target +responses. +</p> +<a name="index-limit-hardware-breakpoints-and-watchpoints"></a> +<a name="index-remote-target_002c-limit-break_002d-and-watchpoints"></a> +<a name="set-remote-hardware_002dwatchpoint_002dlimit"></a><a name="set-remote-hardware_002dbreakpoint_002dlimit"></a></dd> +<dt><code>set remote hardware-watchpoint-limit <var>limit</var></code></dt> +<dt><code>set remote hardware-breakpoint-limit <var>limit</var></code></dt> +<dd><p>Restrict <small>GDB</small> to using <var>limit</var> remote hardware watchpoints +or breakpoints. The <var>limit</var> can be set to 0 to disable hardware +watchpoints or breakpoints, and <code>unlimited</code> for unlimited +watchpoints or breakpoints. +</p> +</dd> +<dt><code>show remote hardware-watchpoint-limit</code></dt> +<dt><code>show remote hardware-breakpoint-limit</code></dt> +<dd><p>Show the current limit for the number of hardware watchpoints or +breakpoints that <small>GDB</small> can use. +</p> +<a name="index-limit-hardware-watchpoints-length"></a> +<a name="index-remote-target_002c-limit-watchpoints-length"></a> +<a name="set-remote-hardware_002dwatchpoint_002dlength_002dlimit"></a></dd> +<dt><code>set remote hardware-watchpoint-length-limit <var>limit</var></code></dt> +<dd><p>Restrict <small>GDB</small> to using <var>limit</var> bytes for the maximum +length of a remote hardware watchpoint. A <var>limit</var> of 0 disables +hardware watchpoints and <code>unlimited</code> allows watchpoints of any +length. +</p> +</dd> +<dt><code>show remote hardware-watchpoint-length-limit</code></dt> +<dd><p>Show the current limit (in bytes) of the maximum length of +a remote hardware watchpoint. +</p> +</dd> +<dt><code>set remote exec-file <var>filename</var></code></dt> +<dt><code>show remote exec-file</code></dt> +<dd><a name="set-remote-exec_002dfile"></a><a name="index-executable-file_002c-for-remote-target"></a> +<p>Select the file used for <code>run</code> with <code>target +extended-remote</code>. This should be set to a filename valid on the +target system. If it is not set, the target will use a default +filename (e.g. the last program run). +</p> +</dd> +<dt><code>set remote interrupt-sequence</code></dt> +<dd><a name="index-interrupt-remote-programs-1"></a> +<a name="index-select-Ctrl_002dC_002c-BREAK-or-BREAK_002dg"></a> +<p>Allow the user to select one of ‘<samp>Ctrl-C</samp>’, a <code>BREAK</code> or +‘<samp>BREAK-g</samp>’ as the +sequence to the remote target in order to interrupt the execution. +‘<samp>Ctrl-C</samp>’ is a default. Some system prefers <code>BREAK</code> which +is high level of serial line for some certain time. +Linux kernel prefers ‘<samp>BREAK-g</samp>’, a.k.a Magic SysRq g. +It is <code>BREAK</code> signal followed by character <code>g</code>. +</p> +</dd> +<dt><code>show remote interrupt-sequence</code></dt> +<dd><p>Show which of ‘<samp>Ctrl-C</samp>’, <code>BREAK</code> or <code>BREAK-g</code> +is sent by <small>GDB</small> to interrupt the remote program. +<code>BREAK-g</code> is BREAK signal followed by <code>g</code> and +also known as Magic SysRq g. +</p> +</dd> +<dt><code>set remote interrupt-on-connect</code></dt> +<dd><a name="index-send-interrupt_002dsequence-on-start"></a> +<p>Specify whether interrupt-sequence is sent to remote target when +<small>GDB</small> connects to it. This is mostly needed when you debug +Linux kernel. Linux kernel expects <code>BREAK</code> followed by <code>g</code> +which is known as Magic SysRq g in order to connect <small>GDB</small>. +</p> +</dd> +<dt><code>show remote interrupt-on-connect</code></dt> +<dd><p>Show whether interrupt-sequence is sent +to remote target when <small>GDB</small> connects to it. +</p> +<a name="index-set-tcp"></a> +<a name="index-show-tcp"></a> +</dd> +<dt><code>set tcp auto-retry on</code></dt> +<dd><a name="index-auto_002dretry_002c-for-remote-TCP-target"></a> +<p>Enable auto-retry for remote TCP connections. This is useful if the remote +debugging agent is launched in parallel with <small>GDB</small>; there is a race +condition because the agent may not become ready to accept the connection +before <small>GDB</small> attempts to connect. When auto-retry is +enabled, if the initial attempt to connect fails, <small>GDB</small> reattempts +to establish the connection using the timeout specified by +<code>set tcp connect-timeout</code>. +</p> +</dd> +<dt><code>set tcp auto-retry off</code></dt> +<dd><p>Do not auto-retry failed TCP connections. +</p> +</dd> +<dt><code>show tcp auto-retry</code></dt> +<dd><p>Show the current auto-retry setting. +</p> +</dd> +<dt><code>set tcp connect-timeout <var>seconds</var></code></dt> +<dt><code>set tcp connect-timeout unlimited</code></dt> +<dd><a name="index-connection-timeout_002c-for-remote-TCP-target"></a> +<a name="index-timeout_002c-for-remote-target-connection"></a> +<p>Set the timeout for establishing a TCP connection to the remote target to +<var>seconds</var>. The timeout affects both polling to retry failed connections +(enabled by <code>set tcp auto-retry on</code>) and waiting for connections +that are merely slow to complete, and represents an approximate cumulative +value. If <var>seconds</var> is <code>unlimited</code>, there is no timeout and +<small>GDB</small> will keep attempting to establish a connection forever, +unless interrupted with <kbd>Ctrl-c</kbd>. The default is 15 seconds. +</p> +</dd> +<dt><code>show tcp connect-timeout</code></dt> +<dd><p>Show the current connection timeout setting. +</p></dd> +</dl> + +<a name="index-remote-packets_002c-enabling-and-disabling"></a> +<p>The <small>GDB</small> remote protocol autodetects the packets supported by +your debugging stub. If you need to override the autodetection, you +can use these commands to enable or disable individual packets. Each +packet can be set to ‘<samp>on</samp>’ (the remote target supports this +packet), ‘<samp>off</samp>’ (the remote target does not support this packet), +or ‘<samp>auto</samp>’ (detect remote target support for this packet). They +all default to ‘<samp>auto</samp>’. For more information about each packet, +see <a href="Remote-Protocol.html#Remote-Protocol">Remote Protocol</a>. +</p> +<p>During normal use, you should not have to use any of these commands. +If you do, that may be a bug in your remote debugging stub, or a bug +in <small>GDB</small>. You may want to report the problem to the +<small>GDB</small> developers. +</p> +<p>For each packet <var>name</var>, the command to enable or disable the +packet is <code>set remote <var>name</var>-packet</code>. The available settings +are: +</p> +<table> +<tr><td width="28%">Command Name</td><td width="32%">Remote Packet</td><td width="25%">Related Features</td></tr> +<tr><td width="28%"><code>fetch-register</code></td><td width="32%"><code>p</code></td><td width="25%"><code>info registers</code></td></tr> +<tr><td width="28%"><code>set-register</code></td><td width="32%"><code>P</code></td><td width="25%"><code>set</code></td></tr> +<tr><td width="28%"><code>binary-download</code></td><td width="32%"><code>X</code></td><td width="25%"><code>load</code>, <code>set</code></td></tr> +<tr><td width="28%"><code>read-aux-vector</code></td><td width="32%"><code>qXfer:auxv:read</code></td><td width="25%"><code>info auxv</code></td></tr> +<tr><td width="28%"><code>symbol-lookup</code></td><td width="32%"><code>qSymbol</code></td><td width="25%">Detecting multiple threads</td></tr> +<tr><td width="28%"><code>attach</code></td><td width="32%"><code>vAttach</code></td><td width="25%"><code>attach</code></td></tr> +<tr><td width="28%"><code>verbose-resume</code></td><td width="32%"><code>vCont</code></td><td width="25%">Stepping or resuming multiple threads</td></tr> +<tr><td width="28%"><code>run</code></td><td width="32%"><code>vRun</code></td><td width="25%"><code>run</code></td></tr> +<tr><td width="28%"><code>software-breakpoint</code></td><td width="32%"><code>Z0</code></td><td width="25%"><code>break</code></td></tr> +<tr><td width="28%"><code>hardware-breakpoint</code></td><td width="32%"><code>Z1</code></td><td width="25%"><code>hbreak</code></td></tr> +<tr><td width="28%"><code>write-watchpoint</code></td><td width="32%"><code>Z2</code></td><td width="25%"><code>watch</code></td></tr> +<tr><td width="28%"><code>read-watchpoint</code></td><td width="32%"><code>Z3</code></td><td width="25%"><code>rwatch</code></td></tr> +<tr><td width="28%"><code>access-watchpoint</code></td><td width="32%"><code>Z4</code></td><td width="25%"><code>awatch</code></td></tr> +<tr><td width="28%"><code>pid-to-exec-file</code></td><td width="32%"><code>qXfer:exec-file:read</code></td><td width="25%"><code>attach</code>, <code>run</code></td></tr> +<tr><td width="28%"><code>target-features</code></td><td width="32%"><code>qXfer:features:read</code></td><td width="25%"><code>set architecture</code></td></tr> +<tr><td width="28%"><code>library-info</code></td><td width="32%"><code>qXfer:libraries:read</code></td><td width="25%"><code>info sharedlibrary</code></td></tr> +<tr><td width="28%"><code>memory-map</code></td><td width="32%"><code>qXfer:memory-map:read</code></td><td width="25%"><code>info mem</code></td></tr> +<tr><td width="28%"><code>read-sdata-object</code></td><td width="32%"><code>qXfer:sdata:read</code></td><td width="25%"><code>print $_sdata</code></td></tr> +<tr><td width="28%"><code>read-siginfo-object</code></td><td width="32%"><code>qXfer:siginfo:read</code></td><td width="25%"><code>print $_siginfo</code></td></tr> +<tr><td width="28%"><code>write-siginfo-object</code></td><td width="32%"><code>qXfer:siginfo:write</code></td><td width="25%"><code>set $_siginfo</code></td></tr> +<tr><td width="28%"><code>threads</code></td><td width="32%"><code>qXfer:threads:read</code></td><td width="25%"><code>info threads</code></td></tr> +<tr><td width="28%"><code>get-thread-local-<br>storage-address</code></td><td width="32%"><code>qGetTLSAddr</code></td><td width="25%">Displaying <code>__thread</code> variables</td></tr> +<tr><td width="28%"><code>get-thread-information-block-address</code></td><td width="32%"><code>qGetTIBAddr</code></td><td width="25%">Display MS-Windows Thread Information Block.</td></tr> +<tr><td width="28%"><code>search-memory</code></td><td width="32%"><code>qSearch:memory</code></td><td width="25%"><code>find</code></td></tr> +<tr><td width="28%"><code>supported-packets</code></td><td width="32%"><code>qSupported</code></td><td width="25%">Remote communications parameters</td></tr> +<tr><td width="28%"><code>catch-syscalls</code></td><td width="32%"><code>QCatchSyscalls</code></td><td width="25%"><code>catch syscall</code></td></tr> +<tr><td width="28%"><code>pass-signals</code></td><td width="32%"><code>QPassSignals</code></td><td width="25%"><code>handle <var>signal</var></code></td></tr> +<tr><td width="28%"><code>program-signals</code></td><td width="32%"><code>QProgramSignals</code></td><td width="25%"><code>handle <var>signal</var></code></td></tr> +<tr><td width="28%"><code>hostio-close-packet</code></td><td width="32%"><code>vFile:close</code></td><td width="25%"><code>remote get</code>, <code>remote put</code></td></tr> +<tr><td width="28%"><code>hostio-open-packet</code></td><td width="32%"><code>vFile:open</code></td><td width="25%"><code>remote get</code>, <code>remote put</code></td></tr> +<tr><td width="28%"><code>hostio-pread-packet</code></td><td width="32%"><code>vFile:pread</code></td><td width="25%"><code>remote get</code>, <code>remote put</code></td></tr> +<tr><td width="28%"><code>hostio-pwrite-packet</code></td><td width="32%"><code>vFile:pwrite</code></td><td width="25%"><code>remote get</code>, <code>remote put</code></td></tr> +<tr><td width="28%"><code>hostio-unlink-packet</code></td><td width="32%"><code>vFile:unlink</code></td><td width="25%"><code>remote delete</code></td></tr> +<tr><td width="28%"><code>hostio-readlink-packet</code></td><td width="32%"><code>vFile:readlink</code></td><td width="25%">Host I/O</td></tr> +<tr><td width="28%"><code>hostio-fstat-packet</code></td><td width="32%"><code>vFile:fstat</code></td><td width="25%">Host I/O</td></tr> +<tr><td width="28%"><code>hostio-setfs-packet</code></td><td width="32%"><code>vFile:setfs</code></td><td width="25%">Host I/O</td></tr> +<tr><td width="28%"><code>noack-packet</code></td><td width="32%"><code>QStartNoAckMode</code></td><td width="25%">Packet acknowledgment</td></tr> +<tr><td width="28%"><code>osdata</code></td><td width="32%"><code>qXfer:osdata:read</code></td><td width="25%"><code>info os</code></td></tr> +<tr><td width="28%"><code>query-attached</code></td><td width="32%"><code>qAttached</code></td><td width="25%">Querying remote process attach state.</td></tr> +<tr><td width="28%"><code>trace-buffer-size</code></td><td width="32%"><code>QTBuffer:size</code></td><td width="25%"><code>set trace-buffer-size</code></td></tr> +<tr><td width="28%"><code>trace-status</code></td><td width="32%"><code>qTStatus</code></td><td width="25%"><code>tstatus</code></td></tr> +<tr><td width="28%"><code>traceframe-info</code></td><td width="32%"><code>qXfer:traceframe-info:read</code></td><td width="25%">Traceframe info</td></tr> +<tr><td width="28%"><code>install-in-trace</code></td><td width="32%"><code>InstallInTrace</code></td><td width="25%">Install tracepoint in tracing</td></tr> +<tr><td width="28%"><code>disable-randomization</code></td><td width="32%"><code>QDisableRandomization</code></td><td width="25%"><code>set disable-randomization</code></td></tr> +<tr><td width="28%"><code>startup-with-shell</code></td><td width="32%"><code>QStartupWithShell</code></td><td width="25%"><code>set startup-with-shell</code></td></tr> +<tr><td width="28%"><code>environment-hex-encoded</code></td><td width="32%"><code>QEnvironmentHexEncoded</code></td><td width="25%"><code>set environment</code></td></tr> +<tr><td width="28%"><code>environment-unset</code></td><td width="32%"><code>QEnvironmentUnset</code></td><td width="25%"><code>unset environment</code></td></tr> +<tr><td width="28%"><code>environment-reset</code></td><td width="32%"><code>QEnvironmentReset</code></td><td width="25%"><code>Reset the inferior environment (i.e., unset user-set variables)</code></td></tr> +<tr><td width="28%"><code>set-working-dir</code></td><td width="32%"><code>QSetWorkingDir</code></td><td width="25%"><code>set cwd</code></td></tr> +<tr><td width="28%"><code>conditional-breakpoints-packet</code></td><td width="32%"><code>Z0 and Z1</code></td><td width="25%"><code>Support for target-side breakpoint condition evaluation</code></td></tr> +<tr><td width="28%"><code>multiprocess-extensions</code></td><td width="32%"><code>multiprocess extensions</code></td><td width="25%">Debug multiple processes and remote process PID awareness</td></tr> +<tr><td width="28%"><code>swbreak-feature</code></td><td width="32%"><code>swbreak stop reason</code></td><td width="25%"><code>break</code></td></tr> +<tr><td width="28%"><code>hwbreak-feature</code></td><td width="32%"><code>hwbreak stop reason</code></td><td width="25%"><code>hbreak</code></td></tr> +<tr><td width="28%"><code>fork-event-feature</code></td><td width="32%"><code>fork stop reason</code></td><td width="25%"><code>fork</code></td></tr> +<tr><td width="28%"><code>vfork-event-feature</code></td><td width="32%"><code>vfork stop reason</code></td><td width="25%"><code>vfork</code></td></tr> +<tr><td width="28%"><code>exec-event-feature</code></td><td width="32%"><code>exec stop reason</code></td><td width="25%"><code>exec</code></td></tr> +<tr><td width="28%"><code>thread-events</code></td><td width="32%"><code>QThreadEvents</code></td><td width="25%">Tracking thread lifetime.</td></tr> +<tr><td width="28%"><code>no-resumed-stop-reply</code></td><td width="32%"><code>no resumed thread left stop reply</code></td><td width="25%">Tracking thread lifetime.</td></tr> +</table> + +<hr> +<div class="header"> +<p> +Next: <a href="Remote-Stub.html#Remote-Stub" accesskey="n" rel="next">Remote Stub</a>, Previous: <a href="Server.html#Server" accesskey="p" rel="previous">Server</a>, Up: <a href="Remote-Debugging.html#Remote-Debugging" accesskey="u" rel="up">Remote Debugging</a> [<a href="index.html#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="Concept-Index.html#Concept-Index" title="Index" rel="index">Index</a>]</p> +</div> + + + +</body> +</html> |