Wifi: Uprev Wifi HAL to 1.4

Move Wifi HAL from 1.3 to 1.4
This commit also include adding the VINTF fragment definition for IWifi
hal.

Bug: 138243400
Test: Builds and wifi works
Change-Id: I5ec9b21f8d6b7e1b5b5e47e26681dd4ed3ffcc2d

1 files changed, 168 insertions, 0 deletions

diff --git a/wifi/1.4/default/wifi_feature_flags.cpp b/wifi/1.4/default/wifi_feature_flags.cpp
new file mode 100644
index 0000000000..f9746eb076
--- /dev/null
+++ b/wifi/1.4/default/wifi_feature_flags.cpp
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "wifi_feature_flags.h"
+
+namespace android {
+namespace hardware {
+namespace wifi {
+namespace V1_4 {
+namespace implementation {
+namespace feature_flags {
+
+using V1_0::ChipModeId;
+using V1_0::IfaceType;
+using V1_0::IWifiChip;
+
+/* The chip may either have a single mode supporting any number of combinations,
+ * or a fixed dual-mode (so it involves firmware loading to switch between
+ * modes) setting. If there is a need to support more modes, it needs to be
+ * implemented manually in WiFi HAL (see changeFirmwareMode in
+ * WifiChip::handleChipConfiguration).
+ *
+ * Supported combinations are defined in device's makefile, for example:
+ *    WIFI_HAL_INTERFACE_COMBINATIONS := {{{STA, AP}, 1}, {{P2P, NAN}, 1}},
+ *    WIFI_HAL_INTERFACE_COMBINATIONS += {{{STA}, 1}, {{AP}, 2}}
+ * What means:
+ *    Interface combination 1: 1 STA or AP and 1 P2P or NAN concurrent iface
+ *                             operations.
+ *    Interface combination 2: 1 STA and 2 AP concurrent iface operations.
+ *
+ * For backward compatibility, the following makefile flags can be used to
+ * generate combinations list:
+ *  - WIFI_HIDL_FEATURE_DUAL_INTERFACE
+ *  - WIFI_HIDL_FEATURE_DISABLE_AP
+ *  - WIFI_HIDL_FEATURE_AWARE
+ * However, they are ignored if WIFI_HAL_INTERFACE_COMBINATIONS was provided.
+ * With WIFI_HIDL_FEATURE_DUAL_INTERFACE flag set, there is a single mode with
+ * two interface combinations:
+ *    Interface Combination 1: Will support 1 STA and 1 P2P or NAN (optional)
+ *                             concurrent iface operations.
+ *    Interface Combination 2: Will support 1 STA and 1 AP concurrent
+ *                             iface operations.
+ *
+ * The only dual-mode configuration supported is for alternating STA and AP
+ * mode, that may involve firmware reloading. In such case, there are 2 separate
+ * modes of operation with 1 interface combination each:
+ *    Mode 1 (STA mode): Will support 1 STA and 1 P2P or NAN (optional)
+ *                       concurrent iface operations.
+ *    Mode 2 (AP mode): Will support 1 AP iface operation.
+ *
+ * If Aware is enabled, the iface combination will be modified to support either
+ * P2P or NAN in place of just P2P.
+ */
+// clang-format off
+#ifdef WIFI_HAL_INTERFACE_COMBINATIONS
+constexpr ChipModeId kMainModeId = chip_mode_ids::kV3;
+#elif defined(WIFI_HIDL_FEATURE_DUAL_INTERFACE)
+// former V2 (fixed dual interface) setup expressed as V3
+constexpr ChipModeId kMainModeId = chip_mode_ids::kV3;
+#  ifdef WIFI_HIDL_FEATURE_DISABLE_AP
+#    ifdef WIFI_HIDL_FEATURE_AWARE
+//     1 STA + 1 of (P2P or NAN)
+#      define WIFI_HAL_INTERFACE_COMBINATIONS {{{STA}, 1}, {{P2P, NAN}, 1}}
+#    else
+//     1 STA + 1 P2P
+#      define WIFI_HAL_INTERFACE_COMBINATIONS {{{STA}, 1}, {{P2P}, 1}}
+#    endif
+#  else
+#    ifdef WIFI_HIDL_FEATURE_AWARE
+//     (1 STA + 1 AP) or (1 STA + 1 of (P2P or NAN))
+#      define WIFI_HAL_INTERFACE_COMBINATIONS {{{STA}, 1}, {{AP}, 1}},\
+                                              {{{STA}, 1}, {{P2P, NAN}, 1}}
+#    else
+//     (1 STA + 1 AP) or (1 STA + 1 P2P)
+#      define WIFI_HAL_INTERFACE_COMBINATIONS {{{STA}, 1}, {{AP}, 1}},\
+                                              {{{STA}, 1}, {{P2P}, 1}}
+#    endif
+#  endif
+#else
+// V1 (fixed single interface, dual-mode chip)
+constexpr ChipModeId kMainModeId = chip_mode_ids::kV1Sta;
+#  ifdef WIFI_HIDL_FEATURE_AWARE
+//   1 STA + 1 of (P2P or NAN)
+#    define WIFI_HAL_INTERFACE_COMBINATIONS {{{STA}, 1}, {{P2P, NAN}, 1}}
+#  else
+//   1 STA + 1 P2P
+#    define WIFI_HAL_INTERFACE_COMBINATIONS {{{STA}, 1}, {{P2P}, 1}}
+#  endif
+
+#  ifndef WIFI_HIDL_FEATURE_DISABLE_AP
+#    define WIFI_HAL_INTERFACE_COMBINATIONS_AP {{{AP}, 1}}
+#  endif
+#endif
+// clang-format on
+
+/**
+ * Helper class to convert a collection of combination limits to a combination.
+ *
+ * The main point here is to simplify the syntax required by
+ * WIFI_HAL_INTERFACE_COMBINATIONS.
+ */
+struct ChipIfaceCombination
+    : public hidl_vec<IWifiChip::ChipIfaceCombinationLimit> {
+    ChipIfaceCombination(
+        const std::initializer_list<IWifiChip::ChipIfaceCombinationLimit> list)
+        : hidl_vec(list) {}
+
+    operator IWifiChip::ChipIfaceCombination() const { return {*this}; }
+
+    static hidl_vec<IWifiChip::ChipIfaceCombination> make_vec(
+        const std::initializer_list<ChipIfaceCombination> list) {
+        return hidl_vec<IWifiChip::ChipIfaceCombination>(  //
+            std::begin(list), std::end(list));
+    }
+};
+
+#define STA IfaceType::STA
+#define AP IfaceType::AP
+#define P2P IfaceType::P2P
+#define NAN IfaceType::NAN
+static const std::vector<IWifiChip::ChipMode> kChipModes{
+    {kMainModeId,
+     ChipIfaceCombination::make_vec({WIFI_HAL_INTERFACE_COMBINATIONS})},
+#ifdef WIFI_HAL_INTERFACE_COMBINATIONS_AP
+    {chip_mode_ids::kV1Ap,
+     ChipIfaceCombination::make_vec({WIFI_HAL_INTERFACE_COMBINATIONS_AP})},
+#endif
+};
+#undef STA
+#undef AP
+#undef P2P
+#undef NAN
+
+#ifdef WIFI_HIDL_FEATURE_DISABLE_AP_MAC_RANDOMIZATION
+static const bool wifiHidlFeatureDisableApMacRandomization = true;
+#else
+static const bool wifiHidlFeatureDisableApMacRandomization = false;
+#endif  // WIFI_HIDL_FEATURE_DISABLE_AP
+
+WifiFeatureFlags::WifiFeatureFlags() {}
+
+std::vector<IWifiChip::ChipMode> WifiFeatureFlags::getChipModes() {
+    return kChipModes;
+}
+
+bool WifiFeatureFlags::isApMacRandomizationDisabled() {
+    return wifiHidlFeatureDisableApMacRandomization;
+}
+
+}  // namespace feature_flags
+}  // namespace implementation
+}  // namespace V1_4
+}  // namespace wifi
+}  // namespace hardware
+}  // namespace android