The Independent JPEG Group's JPEG software v6a

1 files changed, 31 insertions, 32 deletions

diff --git a/jcparam.c b/jcparam.c
index 29862d3..54871d5 100644
--- a/jcparam.c
+++ b/jcparam.c
@@ -1,7 +1,7 @@
 /*
  * jcparam.c
  *
- * Copyright (C) 1991-1995, Thomas G. Lane.
+ * Copyright (C) 1991-1996, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -19,7 +19,7 @@
  * Quantization table setup routines
  */
 
-GLOBAL void
+GLOBAL(void)
 jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
 		      const unsigned int *basic_table,
 		      int scale_factor, boolean force_baseline)
@@ -55,7 +55,7 @@ jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
 }
 
 
-GLOBAL void
+GLOBAL(void)
 jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
 			 boolean force_baseline)
 /* Set or change the 'quality' (quantization) setting, using default tables
@@ -64,31 +64,30 @@ jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
  * applications that insist on a linear percentage scaling.
  */
 {
-  /* This is the sample quantization table given in the JPEG spec section K.1,
-   * but expressed in zigzag order (as are all of our quant. tables).
+  /* These are the sample quantization tables given in JPEG spec section K.1.
    * The spec says that the values given produce "good" quality, and
    * when divided by 2, "very good" quality.
    */
   static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = {
-    16,  11,  12,  14,  12,  10,  16,  14,
-    13,  14,  18,  17,  16,  19,  24,  40,
-    26,  24,  22,  22,  24,  49,  35,  37,
-    29,  40,  58,  51,  61,  60,  57,  51,
-    56,  55,  64,  72,  92,  78,  64,  68,
-    87,  69,  55,  56,  80, 109,  81,  87,
-    95,  98, 103, 104, 103,  62,  77, 113,
-    121, 112, 100, 120,  92, 101, 103,  99
-    };
+    16,  11,  10,  16,  24,  40,  51,  61,
+    12,  12,  14,  19,  26,  58,  60,  55,
+    14,  13,  16,  24,  40,  57,  69,  56,
+    14,  17,  22,  29,  51,  87,  80,  62,
+    18,  22,  37,  56,  68, 109, 103,  77,
+    24,  35,  55,  64,  81, 104, 113,  92,
+    49,  64,  78,  87, 103, 121, 120, 101,
+    72,  92,  95,  98, 112, 100, 103,  99
+  };
   static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = {
-    17,  18,  18,  24,  21,  24,  47,  26,
-    26,  47,  99,  66,  56,  66,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99,
+    17,  18,  24,  47,  99,  99,  99,  99,
+    18,  21,  26,  66,  99,  99,  99,  99,
+    24,  26,  56,  99,  99,  99,  99,  99,
+    47,  66,  99,  99,  99,  99,  99,  99,
     99,  99,  99,  99,  99,  99,  99,  99,
     99,  99,  99,  99,  99,  99,  99,  99,
     99,  99,  99,  99,  99,  99,  99,  99,
     99,  99,  99,  99,  99,  99,  99,  99
-    };
+  };
 
   /* Set up two quantization tables using the specified scaling */
   jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl,
@@ -98,7 +97,7 @@ jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
 }
 
 
-GLOBAL int
+GLOBAL(int)
 jpeg_quality_scaling (int quality)
 /* Convert a user-specified quality rating to a percentage scaling factor
  * for an underlying quantization table, using our recommended scaling curve.
@@ -111,8 +110,8 @@ jpeg_quality_scaling (int quality)
 
   /* The basic table is used as-is (scaling 100) for a quality of 50.
    * Qualities 50..100 are converted to scaling percentage 200 - 2*Q;
-   * note that at Q=100 the scaling is 0, which will cause j_add_quant_table
-   * to make all the table entries 1 (hence, no quantization loss).
+   * note that at Q=100 the scaling is 0, which will cause jpeg_add_quant_table
+   * to make all the table entries 1 (hence, minimum quantization loss).
    * Qualities 1..50 are converted to scaling percentage 5000/Q.
    */
   if (quality < 50)
@@ -124,7 +123,7 @@ jpeg_quality_scaling (int quality)
 }
 
 
-GLOBAL void
+GLOBAL(void)
 jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline)
 /* Set or change the 'quality' (quantization) setting, using default tables.
  * This is the standard quality-adjusting entry point for typical user
@@ -144,7 +143,7 @@ jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline)
  * Huffman table setup routines
  */
 
-LOCAL void
+LOCAL(void)
 add_huff_table (j_compress_ptr cinfo,
 		JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val)
 /* Define a Huffman table */
@@ -160,7 +159,7 @@ add_huff_table (j_compress_ptr cinfo,
 }
 
 
-LOCAL void
+LOCAL(void)
 std_huff_tables (j_compress_ptr cinfo)
 /* Set up the standard Huffman tables (cf. JPEG standard section K.3) */
 /* IMPORTANT: these are only valid for 8-bit data precision! */
@@ -246,7 +245,7 @@ std_huff_tables (j_compress_ptr cinfo)
  * your code will still work (they'll be set to reasonable defaults).
  */
 
-GLOBAL void
+GLOBAL(void)
 jpeg_set_defaults (j_compress_ptr cinfo)
 {
   int i;
@@ -329,7 +328,7 @@ jpeg_set_defaults (j_compress_ptr cinfo)
  * Select an appropriate JPEG colorspace for in_color_space.
  */
 
-GLOBAL void
+GLOBAL(void)
 jpeg_default_colorspace (j_compress_ptr cinfo)
 {
   switch (cinfo->in_color_space) {
@@ -361,7 +360,7 @@ jpeg_default_colorspace (j_compress_ptr cinfo)
  * Set the JPEG colorspace, and choose colorspace-dependent default values.
  */
 
-GLOBAL void
+GLOBAL(void)
 jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace)
 {
   jpeg_component_info * compptr;
@@ -445,7 +444,7 @@ jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace)
 
 #ifdef C_PROGRESSIVE_SUPPORTED
 
-LOCAL jpeg_scan_info *
+LOCAL(jpeg_scan_info *)
 fill_a_scan (jpeg_scan_info * scanptr, int ci,
 	     int Ss, int Se, int Ah, int Al)
 /* Support routine: generate one scan for specified component */
@@ -460,7 +459,7 @@ fill_a_scan (jpeg_scan_info * scanptr, int ci,
   return scanptr;
 }
 
-LOCAL jpeg_scan_info *
+LOCAL(jpeg_scan_info *)
 fill_scans (jpeg_scan_info * scanptr, int ncomps,
 	    int Ss, int Se, int Ah, int Al)
 /* Support routine: generate one scan for each component */
@@ -479,7 +478,7 @@ fill_scans (jpeg_scan_info * scanptr, int ncomps,
   return scanptr;
 }
 
-LOCAL jpeg_scan_info *
+LOCAL(jpeg_scan_info *)
 fill_dc_scans (jpeg_scan_info * scanptr, int ncomps, int Ah, int Al)
 /* Support routine: generate interleaved DC scan if possible, else N scans */
 {
@@ -507,7 +506,7 @@ fill_dc_scans (jpeg_scan_info * scanptr, int ncomps, int Ah, int Al)
  * cinfo->num_components and cinfo->jpeg_color_space must be correct.
  */
 
-GLOBAL void
+GLOBAL(void)
 jpeg_simple_progression (j_compress_ptr cinfo)
 {
   int ncomps = cinfo->num_components;