| Age | Commit message (Collapse) | Author |
|---|
|
This change is part of a topic that moves the recovery resources from the
system partition to the vendor partition, if it exists, or the vendor directory
on the system partition otherwise. The recovery resources are moving from the
system image to the vendor partition so that a single system image may be used
with either an A/B or a non-A/B vendor image. The topic removes a delta in the
system image that prevented such reuse in the past.
The recovery resources that are moving are involved with updating the recovery
partition after an update. In a non-A/B configuration, the system boots from
the recovery partition, updates the other partitions (system, vendor, etc.)
Then, the next time the system boots normally, a script updates the recovery
partition (if necessary). This script, the executables it invokes, and the data
files that it uses were previously on the system partition. The resources that
are moving include the following.
* install-recovery.sh
* applypatch
* recovery-resource.dat (if present)
* recovery-from-boot.p (if present)
This makes the applypatch executable a vendor module.
This change supports making dependencies of the applypatch executable available
to applypatch, which is now on vendor.
Since install-recovery.sh is now a vendor service, we add the
applypatch/vendor_flash_recovery.rc file to /vendor/etc/init to start the
service.
Bug: 68319577
Test: Ensure that recovery partition is updated correctly.
Change-Id: I01c0800ee6078aa6c9d716d5f154ad2d63c7af84
|
|
And set it to false when installing recovery image via applypatch. We
only need to back up the source partition when doing in-place update
(e.g. when updating a given partition under recovery). When installing
recovery image via applypatch, we won't touch the source partition (i.e.
/boot).
Removing the backup step also allows dropping the dac_override_allowed
permission. Previously it was needed due to the access to /cache.
Because applypatch runs as root:root, while /cache is owned by
system:cache with 0770.
Bug: 68319577
Test: Invoke the code that installs recovery image; check that recovery
is installed successfully without denials.
Test: recovery_unit_test passes on taimen.
Change-Id: I549a770b511762189d6672a2835b6e403d695919
|
|
The expression "!fd" calls the implicit conversion to int, but comparing
the raw fd against 0 does not work, since open() and other POSIX calls
returning a file descriptor use -1 to signal an error.
Test: m recovery
Change-Id: I0847c276f39cb9dd09c7ffb96951276113418fc8
|
|
Bug: 110106408
Test: Run recovery_unit_test and recovery_component_test on marlin.
Change-Id: Id72e24dd00eb451565d90cff6e049f4f4b844ea2
|
|
applypatch() was initially designed for file-based OTA, operating on
individual files. It was later extended to allow patching eMMC targets
as a whole, in favor of block-based updates.
As we have deprecated file-based OTA since Oreo, part of the code in
applypatch() has become obsolete. This CL refactors the related
functions, by removing the obsolete logic and focusing on eMMC targets.
Since this CL substantially changes applypatch APIs, it adds new
functions to avoid unintentionally mixing them together. In particular,
it removes `applypatch()`, `applypatch_check()`, `applypatch_flash()`,
and adds `PatchPartition()`, `PatchPartitionCheck()`, `FlashPartition()`
and `CheckPartition()`. It also replaces the old Edify functions
`apply_patch()` and `apply_patch_check()` with `patch_partition()` and
`patch_partition_check()` respectively.
This CL requires matching changes to OTA generation script (in the same
topic).
Bug: 110106408
Test: Run recovery_unit_test and recovery_component_test on marlin.
Test: `m dist` with non-A/B target. Verify
/system/bin/install-recovery.sh on device.
Test: `m dist` with non-A/B target using BOARD_USES_FULL_RECOVERY_IMAGE.
Verify /system/bin/install-recovery.sh on device.
Test: Install an incremental OTA with the new updater and scripts.
Change-Id: Ia34a90114bb227f4216eb478c22dc98c8194cb7f
|
|
Now it's less beneficial to inject I/O faults since we don't see many of
them. Remove the library that mocks I/O failures. And switch to android::base
I/O when possible.
Bug: 113032079
Test: unit tests pass
Change-Id: I9f2a92b7ba80f4da6ff9e2abc27f2680138f942c
|
|
This applies to the standalone applypatch executable
(/system/bin/applypatch on device). This executable is only used when
installing (via patching or flashing) a recovery image on non-A/B
device.
This CL removes the support for patching non-eMMC targets from
applypatch that has been deprecated as part of file-based OTA. For
patching eMMC targets, it also drops the support for accepting multiple
patches (not useful, since the source file must be fixed).
This CL needs the matching change in the same topic, which writes the
script of "/system/bin/install-recovery.sh". Note that this CL doesn't
chanage the applypatch API signatures, in order to minimize the CL size.
*BEFORE*
usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...]
or /system/bin/applypatch -c <file> [<sha1> ...]
or /system/bin/applypatch -l
Filenames may be of the form
EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:...
to specify reading from or writing to an EMMC partition.
*AFTER*
Usage:
check mode
applypatch --check EMMC:<target-file>:<target-size>:<target-sha1>
flash mode
applypatch --flash <source-file>
--target EMMC:<target-file>:<target-size>:<target-sha1>
patch mode
applypatch [--bonus <bonus-file>]
--patch <patch-file>
--target EMMC:<target-file>:<target-size>:<target-sha1>
--source EMMC:<source-file>:<source-size>:<source-sha1>
show license
applypatch --license
Bug: 110106408
Test: Run recovery_component_test and recovery_unit_test on marlin.
Test: Build a non-A/B target that has /system/bin/install-recovery.sh.
Verify that it installs recovery image successfully.
Test: Build a non-A/B target that has /system/bin/install-recovery.sh in
flashing mode. Verify that it installs recovery image successfully.
Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
|
|
They are doing exactly the same thing, except for the slightly different
error return value (1 vs -1).
int CacheSizeCheck(size_t bytes);
int MakeFreeSpaceOnCache(size_t bytes_needed);
This CL consolidates the two functions and uses bool as its return type.
// Checks whether /cache partition has at least 'bytes'-byte free space. Returns true immediately
// if so. Otherwise, it will try to free some space by removing older logs, checks again and
// returns the checking result.
bool CheckAndFreeSpaceOnCache(size_t bytes);
Test: Run recovery_unit_test and recovery_component_test on marlin.
Change-Id: I94a96934d2b18713f8f39ad5aa96a02c98d87963
|
|
Prior to this CL, FreeSpaceForFile() was returning `size_t`, which may
overflow on ILP32 when called on a partition with 4GiB+ free space.
Additionally, it was returning static_cast<size_t>(-1) on error, but the
caller in freecache.cpp didn't check for that.
This CL changes its return type to `int64_t`, and moves the function
into freecache.cpp since there's no external caller.
Test: Run recovery_unit_test on marlin.
Test: Code search shows no external user of FreeSpaceForFile().
Change-Id: I00f501a057726e1f1ab69f367c46c77b30f2d774
|
|
We already know the flakiness happens in bspatch, and the issue is
tracked in b/80193170.
Bug: 67849209
Test: unit tests pass
Change-Id: Ib4772b8f2f0225125096fe7407d083b5bb542cfb
|
|
Test: mmma -j bootable/recovery
Test: Run recovery_component_test and recovery_unit_test on marlin.
Change-Id: I4b240e3e771c387b9694be9c0f2f74e0265ab4cb
|
|
|
|
Also fix an error-pone behavior in previous code when verifying an eMMC
target. As long as it loads the partition content successfully according
to the SHAs embedded in the filename, it shouldn't further check against
the SHAs given in the second argument. Because the loaded contents
relate to a specific partition size.
For example:
apply_patch_check(
"EMMC:/boot.img:src_size:src_hash:tgt_size:tgt_hash",
"src_hash");
Assume "/boot.img" already has the desired hash of "tgt_hash", the
previous code would give wrong verification result. The issue can be
addressed by additionally listing "tgt_hash" as one of the desired SHAs
(or by applying this CL).
Bug: 110106408
Test: Run recovery_unit_test and recovery_component_test on marlin.
Change-Id: I8daafdbecd083f687e24d563ab089caa25667633
|
|
Note that the code exists in debugging path only, and won't be hit
unless device has flaky flash.
Test: Run recovery_unit_test and recovery_component_test on marlin.
Change-Id: I0c71adc271f08f00e3eabd9d14cd8af3186c5bae
|
|
Test: mmma -j bootable/recovery
Test: Run recovery_component_test on marlin.
Change-Id: Ifcf244346a88dac833d91b169a4c2aee1fe677f1
|
|
Test: mmma -j bootable/recovery
Test: Run recovery_component_test on marlin.
Change-Id: I3a4e32eb2c1e231c6690a50571edc66341b8d50a
|
|
Also two minor changes (other than renaming some parameters):
- Added constness to the first parameter of FindMatchingPatch();
- Declared WriteToPartition() as static.
Bug: 110106408
Test: mmma -j bootable/recovery
Change-Id: I388958c944a23ce4a38a757ce2249f6a89dd4f03
|
|
Save the target file to tempfile upon unittest failures so that we can
try to decompress the deflate chunks in the flaky unittests. And print
the zlib version in case that gets changed.
Also the SHA1 of the uncompressed data seems correct; so only keep the
final SHA1 to double confirm.
Bug: 67849209
Test: recovery_component_test
Change-Id: Ic6447c2b75c29379d6844cd23a0ff1c4305694a0
|
|
We have a general need for overriding more paths (e.g. "/tmp"), mostly
for testing purpose. Rename CacheLocation to Paths, and use that to
manage TEMPORARY_{INSTALL,LOG}_FILE.
Test: mmma -j bootable/recovery
Test: recovery_component_test
Change-Id: Ia8ce8e5695df37ca434f13ac4d3206de1e8e9396
|
|
The apply patch test should have a deterministic way to append patch
data. Add debug logs to dump the length and SHA1 of each step to further
track down the flakiness.
Also redirect the debug logging to stdout in case the logcat becomes too
chatty.
Bug: 67849209
Test: Run recovery_component_test
Change-Id: I42bafef2d9dee599719ae57840b3d8c00d243ebd
|
|
As they're accepting the SinkFn callback, it makes more sense to leave
the work to their callers.
Test: mmma -j bootable/recovery
Test: Run recovery_component_test on marlin.
Test: No other active user of the two functions.
Change-Id: I8d67b38ce037925442296f136b483e0c71983777
|
|
After splitting the previously flaky
ApplyPatchModesTest#PatchModeEmmcTarget tests,
PatchModeEmmcTargetWithMultiplePatches now becomes the sole victim. This
CL dumps additional info to narrow down the cause.
Bug: 67849209
Test: `recovery_component_test` on marlin.
Test: It dumps additional info after using corrupt bonus.file.
Change-Id: Ic5436de457cc882a51d03f49d5cee70077f7d3df
|
|
We set the limit of the max stash size to 80% of cache size. But the
cache space can still be insufficient for the update if the log files
occupy a large chunk of /cache. So remove the old logs for now to make
room for the update.
Bug: 77528881
Test: unit tests pass
Change-Id: Ia8bcb0ace11f8164ad9290bfb360e08e31d282cb
|
|
This class allows us to set the following locations dynamically:
cache_temp_source, last_command_file, stash_directory_base.
In the updater's main function, we reset the values of these variables
to their default locations in /cache; while we can set them to temp
files in unit tests or host simulation.
Test: unit tests pass
Change-Id: I528652650caa41373617ab055d41b1f1a4ec0f87
|
|
When running the update simulation, we choose to skip the cache size
check for now due to the lack of "/cache" on host. And in later cls we
can implement a cache size estimator to make the check more constrained.
Also build the host version of support libraries.
Test: unit test pass
Change-Id: I3ed93c857fd02f7b62f5baba9130f75c3236e717
|
|
It used to keep track of the stat(2) info (e.g. st_mode/st_gid/st_uid)
while patching a file in file-based OTA.
Test: Build and use the new updater to apply an update on bullhead.
Change-Id: Ibf8f0f4b14298a9489bf24a2678bb279c5d9c8f3
|
|
Apply{BSDiff,Image}Patch.
It used to be "const Value*", but nullptr won't be a valid input.
Test: recovery_host_test; recovery_component_test
Change-Id: I904b5689ac3e64504088bf0544c9fb5d45a52243
|
|
We encountered segfaults in Imgdiff host tests due to the failure to
reset states of getopt. The problem can be solved by switching to use
bionic's gtest where a new process is forked for each test.
Also modify the recovery_component_test to make sure it runs in parallel.
Changes include:
1. Merge the writes to misc partition into one single test.
2. Change the hard coded location "/cache/saved.file" into a configurable
variable.
Bug: 67849209
Test: recovery tests pass
Change-Id: I165d313f32b83393fb7922c5078636ac40b50bc2
|
|
Also drop the "bootable/recovery" path in LOCAL_C_INCLUDES from
applypatch modules.
Test: lunch aosp_{angler,bullhead,fugu,dragon,sailfish}-userdebug;
mmma bootable/recovery
Change-Id: Idd602a796894f971ee4f8fa3eafe36c42d9de986
|
|
Test: mmma bootable/recovery
Change-Id: I3ceb72f703c7c2857d656c137d71baa1fccd8238
|
|
Test: mmma bootable/recovery system/update_engine
Test: recovery_component_test
Change-Id: I93c2caa87bf94a53509bb37f98f2c02bcadb6f5c
|
|
Mostly for applypatch family APIs like ApplyBSDiffPatch() and
ApplyImagePatch(). Changing to size_t doesn't indicate they would
necessarily work with very large size_t (e.g. > ssize_t), just
similar to write(2). But otherwise accepting negative length doesn't
make much sense.
Also change the return type of SinkFn from ssize_t to size_t. Callers
tell a successful sink by comparing the number of written bytes against
the desired value. Negative return values like -1 are not needed. This
also makes it consistent with bsdiff::bspatch interface.
Test: recovery_component_test
Test: Apply an incremental with the new updater.
Change-Id: I7ff1615203a5c9854134f75d019e266f4ea6e714
|
|
Patching regular files is used in file-based OTA only, which has become
obsolete.
Bug: 35853185
Test: Apply an incremental that patches the boot.img.
Test: /system/bin/install-recovery.sh works.
Test: recovery_component_test passes.
Change-Id: Id44e42c4bc63f2162ecc8a6df1cb528b7ae6b0a9
|
|
Test: make
Change-Id: Ic77c4669574b6129e06aa6051804f419bcc8196c
|
|
https://code.google.com/p/android/issues/detail?id=230602
On the second attempt， open the file with O_RDONLY，
which causing a write failure。
Change-Id: If89165b8c7619fe25722073a46b3cc7c61530a71
Signed-off-by: katao <ustckato@gmail.com>
|
|
We should always use unique_fd or unique_file to hold the FD or FILE*
pointer when opening via ota_(f)open functions.
This CL avoids accidentally closing raw FDs or FILE* pointers that are
managed by unique_fd/unique_file.
Test: recovery_component_test passes.
Change-Id: If58eb8b5c5da507563f85efd5d56276472a1c957
|
|
We were using the below sequence prior to the CL in [1].
unique_fd fd(ota_open(...));
ota_close(fd);
fd.reset(ota_open(...));
fd.reset() may unintentionally close the newly opened FD if it
has the same value as the early ota_open. The CL in [1] changed to
"ota_close(fd.release())" to avoid the issue. This CL adds a new
overloaded function ota_close(unique_fd&) to handle the release
automatically.
Similarly add ota_fclose(std::unique_ptr<FILE>&).
[1] commit 48cf770471ef53fbf0a1837196220862a0bdb18d.
Bug: 33034669
Test: recovery_component_test passes.
Change-Id: Ief91edc590e95a7426e33364b28754173efb1056
|
|
We use android::base::unique_fd() to avoid leaking FD. We also want to
call close (or ota_close) to explicitly check the close result. When
combining the two together, we need to release the unique_fd to avoid
closing the same FD twice.
Bug: 33034669
Test: Trigger applypatch with install-recovery.sh.
Change-Id: I1a4f5d5fba7a23ef98d8bd7b7b07e87ae6f705c5
|
|
Add unique_fd that calls ota_close() instead of the default closer.
Test: recovery_component_test passes.
Test: Apply a package that calls apply_patch().
Change-Id: I0c19921731757934f76cf7d5215916673a8f2777
|
|
We don't need three vectors to sort the (size, SHA-1) pairs.
Test: recovery_component_test passes.
Test: Apply a package that calls apply_patch_check() to patch EMMC
partitions.
Change-Id: I4a6620630a6711f490822cf30f1e7fe5cea6ce49
|
|
Test: Unit tests and install-recovery.sh pass on angler and dragon.
Change-Id: I328e6554edca667cf850f5584ebf1ac211e3d4d1
|
|
Applypatch_check should be skipped if no sha is specified. As the
comments said: "It's okay to specify no sha1s; the check will pass if
the LoadFileContents is successful. Useful for reading partitions,
where the filename encodes the sha1s."
Test: The update package applied on angler successfully.
Bug: 32243751
Change-Id: Ib8f3dadf19f745c2dbd350d60da46ab12d75bc87
|
|
Changing the field of 'Value' in edify to std::string from char*.
Meanwhile cleaning up the users of 'Value' and switching them to
cpp style.
Test: compontent tests passed.
Bug: 31713288
Change-Id: Iec5a7d601b1e4ca40935bf1c70d325dafecec235
|
|
We might end up in an infinite loop if read(2) reached EOF unexpectedly.
The problematic code in uncrypt mentioned in the bug has been fixed
by switching to libbase ReadFully(). So I grepped through the recovery
code and fixed some other occurences of the issue.
Bug: 31073201
Change-Id: Ib867029158ba23363b8f85d61c25058a635c5a6b
|
|
Bug: http://b/29250988
Change-Id: Ia97ba9082a165c37f74d6e1c3f71a367adc59945
|
|
Bug: 28220065
Change-Id: Ida199c66692a1638be6990d583d2ed42583fb592
|
|
If two libraries both use LOCAL_WHOLE_STATIC_LIBRARIES and include a same
library, there would be linking errors when generating a shared library
(or executable) that depends on the two libraries both.
Also clean up Android.mk files.
Remove the "LOCAL_MODULE_TAGS := eng" line for the updater module. The
module will then default to "optional" which won't be built until needed.
Change-Id: I3ec227109b8aa744b7568e7f82f575aae3fe0e6f
|
|
Bug: 26570379
Change-Id: I76109d09276d6e3ed3a32b6fedafb2582f545c0c
(cherry picked from commit d940887dde23597dc358b16d96ca48dd7480fee6)
|
|
Bug: 26906416
Change-Id: Ib53b445cd415a1ed5e95733fbc4073f9ef4dbc43
|
|
Bug: 25951086
Change-Id: I31c74c735eb7a975b7f41fe2b2eff042e5699c0c
(cherry-picked from commit f1fc48c6e62cfee42d25ad12f443e22d50c15d0b)
|
