diff options
| -rw-r--r-- | qcwcn/wifi_hal/roam.cpp | 2 | ||||
| -rw-r--r-- | qcwcn/wpa_supplicant_8_lib/driver_cmd_nl80211.c | 4 | ||||
| -rw-r--r-- | qcwcn/wpa_supplicant_8_lib/qca-vendor_copy.h | 233 |
3 files changed, 235 insertions, 4 deletions
diff --git a/qcwcn/wifi_hal/roam.cpp b/qcwcn/wifi_hal/roam.cpp index e6dea0c..595fc60 100644 --- a/qcwcn/wifi_hal/roam.cpp +++ b/qcwcn/wifi_hal/roam.cpp @@ -19,7 +19,7 @@ #include "common.h" #include "roamcommand.h" -#define WLAN_ROAM_MAX_NUM_WHITE_LIST 4 +#define WLAN_ROAM_MAX_NUM_WHITE_LIST 8 #define WLAN_ROAM_MAX_NUM_BLACK_LIST 16 RoamCommand::RoamCommand(wifi_handle handle, int id, u32 vendor_id, u32 subcmd) diff --git a/qcwcn/wpa_supplicant_8_lib/driver_cmd_nl80211.c b/qcwcn/wpa_supplicant_8_lib/driver_cmd_nl80211.c index 92f18c0..7c34b1c 100644 --- a/qcwcn/wpa_supplicant_8_lib/driver_cmd_nl80211.c +++ b/qcwcn/wpa_supplicant_8_lib/driver_cmd_nl80211.c @@ -641,15 +641,13 @@ int wpa_driver_nl80211_driver_event(struct wpa_driver_nl80211_data *drv, u8 *data, size_t len) { int ret = -1; - wpa_printf(MSG_INFO, "wpa_driver_nld80211 vendor event recieved"); switch(subcmd) { case QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT: ret = wpa_driver_nl80211_oem_event(drv, vendor_id, subcmd, data, len); break; default: - wpa_printf(MSG_DEBUG, "Unsupported vendor event recieved %d", - subcmd); + break; } return ret; } diff --git a/qcwcn/wpa_supplicant_8_lib/qca-vendor_copy.h b/qcwcn/wpa_supplicant_8_lib/qca-vendor_copy.h index 268ecfe..e727df1 100644 --- a/qcwcn/wpa_supplicant_8_lib/qca-vendor_copy.h +++ b/qcwcn/wpa_supplicant_8_lib/qca-vendor_copy.h @@ -4270,6 +4270,139 @@ enum qca_vendor_roam_triggers { QCA_ROAM_TRIGGER_REASON_EXTERNAL_SCAN = 1 << 12, }; +/* + * enum qca_vendor_roam_fail_reasons: Defines the various roam + * fail reasons. This enum value is used in + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON attribute. + * + * @QCA_ROAM_FAIL_REASON_SCAN_NOT_ALLOWED: Roam module in the firmware is not + * able to trigger the scan. + * @QCA_ROAM_FAIL_REASON_NO_AP_FOUND: No roamable APs found during roam scan. + * @QCA_ROAM_FAIL_REASON_NO_CAND_AP_FOUND: No candidate APs found during roam + * scan. + * @QCA_ROAM_FAIL_REASON_HOST: Roam fail due to disconnect issued from host. + * @QCA_ROAM_FAIL_REASON_AUTH_SEND: Unable to send Authentication frame. + * @QCA_ROAM_FAIL_REASON_AUTH_RECV: Received Authentication frame with error + * status code. + * @QCA_ROAM_FAIL_REASON_NO_AUTH_RESP: Authentication frame not received. + * @QCA_ROAM_FAIL_REASON_REASSOC_SEND: Unable to send Reassociation Request + * frame. + * @QCA_ROAM_FAIL_REASON_REASSOC_RECV: Received Reassociation Response frame + * with error status code. + * @QCA_ROAM_FAIL_REASON_NO_REASSOC_RESP: Reassociation Response frame not + * received. + * @QCA_ROAM_FAIL_REASON_SCAN_FAIL: Scan module not able to start scan. + * @QCA_ROAM_FAIL_REASON_AUTH_NO_ACK: No ACK is received for Authentication + * frame. + * @QCA_ROAM_FAIL_REASON_AUTH_INTERNAL_DROP: Authentication frame is dropped + * internally before transmission. + * @QCA_ROAM_FAIL_REASON_REASSOC_NO_ACK: No ACK is received for Reassociation + * Request frame. + * @QCA_ROAM_FAIL_REASON_REASSOC_INTERNAL_DROP: Reassociation Request frame is + * dropped internally. + * @QCA_ROAM_FAIL_REASON_EAPOL_M1_TIMEOUT: EAPOL-Key M1 is not received and + * times out. + * @QCA_ROAM_FAIL_REASON_EAPOL_M2_SEND: Unable to send EAPOL-Key M2 frame. + * @QCA_ROAM_FAIL_REASON_EAPOL_M2_INTERNAL_DROP: EAPOL-Key M2 frame dropped + * internally. + * @QCA_ROAM_FAIL_REASON_EAPOL_M2_NO_ACK: No ACK is received for EAPOL-Key + * M2 frame. + * @QCA_ROAM_FAIL_REASON_EAPOL_M3_TIMEOUT: EAPOL-Key M3 frame is not received. + * @QCA_ROAM_FAIL_REASON_EAPOL_M4_SEND: Unable to send EAPOL-Key M4 frame. + * @QCA_ROAM_FAIL_REASON_EAPOL_M4_INTERNAL_DROP: EAPOL-Key M4 frame dropped + * internally. + * @QCA_ROAM_FAIL_REASON_EAPOL_M4_NO_ACK: No ACK is received for EAPOL-Key M4 + * frame. + * @QCA_ROAM_FAIL_REASON_NO_SCAN_FOR_FINAL_BEACON_MISS: Roam scan is not + * started for final beacon miss case. + * @QCA_ROAM_FAIL_REASON_DISCONNECT: Deauthentication or Disassociation frame + * received from the AP during roaming handoff. + * @QCA_ROAM_FAIL_REASON_RESUME_ABORT: Firmware roams to the AP when the Apps + * or host is suspended and gives the indication of the last roamed AP only + * when the Apps is resumed. If the Apps is resumed while the roaming is in + * progress, this ongoing roaming is aborted and the last roamed AP is + * indicated to host. + * @QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID: WPA3-SAE invalid PMKID. + * @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT: WPA3-SAE pre-authentication times + * out. + * @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL: WPA3-SAE pre-authentication fails. + */ +enum qca_vendor_roam_fail_reasons { + QCA_ROAM_FAIL_REASON_NONE = 0, + QCA_ROAM_FAIL_REASON_SCAN_NOT_ALLOWED = 1, + QCA_ROAM_FAIL_REASON_NO_AP_FOUND = 2, + QCA_ROAM_FAIL_REASON_NO_CAND_AP_FOUND = 3, + QCA_ROAM_FAIL_REASON_HOST = 4, + QCA_ROAM_FAIL_REASON_AUTH_SEND = 5, + QCA_ROAM_FAIL_REASON_AUTH_RECV = 6, + QCA_ROAM_FAIL_REASON_NO_AUTH_RESP = 7, + QCA_ROAM_FAIL_REASON_REASSOC_SEND = 8, + QCA_ROAM_FAIL_REASON_REASSOC_RECV = 9, + QCA_ROAM_FAIL_REASON_NO_REASSOC_RESP = 10, + QCA_ROAM_FAIL_REASON_SCAN_FAIL = 11, + QCA_ROAM_FAIL_REASON_AUTH_NO_ACK = 12, + QCA_ROAM_FAIL_REASON_AUTH_INTERNAL_DROP = 13, + QCA_ROAM_FAIL_REASON_REASSOC_NO_ACK = 14, + QCA_ROAM_FAIL_REASON_REASSOC_INTERNAL_DROP = 15, + QCA_ROAM_FAIL_REASON_EAPOL_M1_TIMEOUT = 16, + QCA_ROAM_FAIL_REASON_EAPOL_M2_SEND = 17, + QCA_ROAM_FAIL_REASON_EAPOL_M2_INTERNAL_DROP = 18, + QCA_ROAM_FAIL_REASON_EAPOL_M2_NO_ACK = 19, + QCA_ROAM_FAIL_REASON_EAPOL_M3_TIMEOUT = 20, + QCA_ROAM_FAIL_REASON_EAPOL_M4_SEND = 21, + QCA_ROAM_FAIL_REASON_EAPOL_M4_INTERNAL_DROP = 22, + QCA_ROAM_FAIL_REASON_EAPOL_M4_NO_ACK = 23, + QCA_ROAM_FAIL_REASON_NO_SCAN_FOR_FINAL_BEACON_MISS = 24, + QCA_ROAM_FAIL_REASON_DISCONNECT = 25, + QCA_ROAM_FAIL_REASON_RESUME_ABORT = 26, + QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID = 27, + QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT = 28, + QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL = 29, +}; + +/* + * enum qca_vendor_roam_invoke_fail_reasons: Defines the various roam + * invoke fail reasons. This enum value is used in + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON attribute. + * + * @QCA_ROAM_INVOKE_STATUS_IFACE_INVALID: Invalid interface ID is passed + * in roam invoke command. + * @QCA_ROAM_INVOKE_STATUS_OFFLOAD_DISABLE: Roam offload in firmware is not + * enabled. + * @QCA_ROAM_INVOKE_STATUS_AP_SSID_LENGTH_INVALID: Connected AP profile SSID + * length is invalid. + * @QCA_ROAM_INVOKE_STATUS_ROAM_DISALLOW: Firmware internal roaming is already + * in progress. + * @QCA_ROAM_INVOKE_STATUS_NON_ROAMABLE_AP: Host sends the Beacon/Probe Response + * of the AP in the roam invoke command to firmware. This reason is sent by the + * firmware when the given AP is configured to be ignored or SSID/security + * does not match. + * @QCA_ROAM_INVOKE_STATUS_ROAM_INTERNAL_FAIL: Roam handoff failed because of + * firmware internal reasons. + * @QCA_ROAM_INVOKE_STATUS_DISALLOW: Roam invoke trigger is not enabled. + * @QCA_ROAM_INVOKE_STATUS_SCAN_FAIL: Scan start fail for roam invoke. + * @QCA_ROAM_INVOKE_STATUS_START_ROAM_FAIL: Roam handoff start fail. + * @QCA_ROAM_INVOKE_STATUS_INVALID_PARAMS: Roam invoke parameters are invalid. + * @QCA_ROAM_INVOKE_STATUS_NO_CAND_AP: No candidate AP found to roam to. + * @QCA_ROAM_INVOKE_STATUS_ROAM_FAIL: Roam handoff failed. + */ +enum qca_vendor_roam_invoke_fail_reasons { + QCA_ROAM_INVOKE_STATUS_NONE = 0, + QCA_ROAM_INVOKE_STATUS_IFACE_INVALID = 1, + QCA_ROAM_INVOKE_STATUS_OFFLOAD_DISABLE = 2, + QCA_ROAM_INVOKE_STATUS_AP_SSID_LENGTH_INVALID = 3, + QCA_ROAM_INVOKE_STATUS_ROAM_DISALLOW = 4, + QCA_ROAM_INVOKE_STATUS_NON_ROAMABLE_AP = 5, + QCA_ROAM_INVOKE_STATUS_ROAM_INTERNAL_FAIL = 6, + QCA_ROAM_INVOKE_STATUS_DISALLOW = 7, + QCA_ROAM_INVOKE_STATUS_SCAN_FAIL = 8, + QCA_ROAM_INVOKE_STATUS_START_ROAM_FAIL = 9, + QCA_ROAM_INVOKE_STATUS_INVALID_PARAMS = 10, + QCA_ROAM_INVOKE_STATUS_NO_CAND_AP = 11, + QCA_ROAM_INVOKE_STATUS_ROAM_FAIL = 12, + +}; + /** * enum qca_vendor_attr_roam_candidate_selection_criteria: * @@ -7852,6 +7985,52 @@ enum qca_wlan_vendor_attr_wifi_test_config { */ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FULL_BW_UL_MU_MIMO = 45, + /* 16-bit unsigned value to configure the driver with a specific BSS + * max idle period to advertise in the BSS Max Idle Period element + * (IEEE Std 802.11-2016, 9.4.2.79) in (Re)Association Request frames. + * This attribute is used to configure the testbed device. + */ + QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_BSS_MAX_IDLE_PERIOD = 46, + + /* 8-bit unsigned value to configure the driver to use only RU 242 tone + * for data transmission. + * 0 - Default behavior, 1 - Configure RU 242 tone for data Tx. + * This attribute is used to configure the testbed device. + */ + QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_RU_242_TONE_TX = 47, + + /* 8-bit unsigned value to configure the driver to disable data and + * management response frame transmission to test the BSS max idle + * feature. + * 0 - Default behavior, 1 - Disable data and management response Tx. + * This attribute is used to configure the testbed device. + */ + QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_DISABLE_DATA_MGMT_RSP_TX = 48, + + /* 8-bit unsigned value to configure the driver/firmware to enable or + * disable Punctured Preamble Rx subfield in the HE PHY capabilities + * information field. + * 0 - Disable Punctured Preamble Rx subfield + * 1 - Enable Punctured Preamble Rx subfield + * This attribute is used to configure the testbed device. + */ + QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_PUNCTURED_PREAMBLE_RX = 49, + + /* 8-bit unsigned value to configure the driver to ignore the SAE H2E + * requirement mismatch for 6 GHz connection. + * 0 - Default behavior, 1 - Ignore SAE H2E requirement mismatch. + * This attribute is used to configure the testbed device. + */ + QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_IGNORE_H2E_RSNXE = 50, + + /* 8-bit unsigned value to configure the driver to allow 6 GHz + * connection with all security modes. + * 0 - Default behavior, 1 - Allow 6 GHz connection with all security + * modes. + * This attribute is used for testing purposes. + */ + QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_6GHZ_SECURITY_TEST_MODE = 51, + /* keep last */ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST, QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX = @@ -8285,6 +8464,14 @@ enum qca_wlan_twt_setup_state { * TWT state for the given dialog id. The values for this are represented * by enum qca_wlan_twt_setup_state. * This is obtained through TWT GET operation. + * + * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL2_MANTISSA: Optional (u32) + * This attribute is used to configure wake interval mantissa. + * The unit is microseconds. This attribute, when specified, takes + * precedence over QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA. + * This parameter is used for + * 1. TWT SET Request and Response + * 2. TWT GET Response */ enum qca_wlan_vendor_attr_twt_setup { QCA_WLAN_VENDOR_ATTR_TWT_SETUP_INVALID = 0, @@ -8312,6 +8499,8 @@ enum qca_wlan_vendor_attr_twt_setup { QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX_WAKE_DURATION = 19, QCA_WLAN_VENDOR_ATTR_TWT_SETUP_STATE = 20, + QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL2_MANTISSA = 21, + /* keep last */ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST, QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX = @@ -8350,6 +8539,9 @@ enum qca_wlan_vendor_attr_twt_setup { * @QCA_WLAN_VENDOR_TWT_STATUS_ROAM_INITIATED_TERMINATE: FW terminated the TWT * session due to roaming. Used on the TWT_TERMINATE notification from the * firmware. + * @QCA_WLAN_VENDOR_TWT_STATUS_SCC_MCC_CONCURRENCY_TERMINATE: FW terminated the + * TWT session due to SCC (Single Channel Concurrency) and MCC (Multi Channel + * Concurrency). Used on the TWT_TERMINATE notification from the firmware. */ enum qca_wlan_vendor_twt_status { QCA_WLAN_VENDOR_TWT_STATUS_OK = 0, @@ -8370,6 +8562,7 @@ enum qca_wlan_vendor_twt_status { QCA_WLAN_VENDOR_TWT_STATUS_PARAMS_NOT_IN_RANGE = 15, QCA_WLAN_VENDOR_TWT_STATUS_PEER_INITIATED_TERMINATE = 16, QCA_WLAN_VENDOR_TWT_STATUS_ROAM_INITIATED_TERMINATE = 17, + QCA_WLAN_VENDOR_TWT_STATUS_SCC_MCC_CONCURRENCY_TERMINATE = 18, }; /** @@ -9969,6 +10162,40 @@ enum qca_vendor_wlan_sta_guard_interval { * include this attribute in response to the * QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO command if there is no connection * failure observed in the last attempted connection. + * + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_RATE: u32, latest TX rate (Kbps) + * used by the station in its last TX frame while communicating to the AP in the + * connected state. When queried in the disconnected state, this represents the + * rate used by the STA in the last TX frame to the AP when it was connected. + * This attribute is used for STA mode only. + * + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_RIX: u32, used in STA mode only. + * This represents the rate index used by the STA for the last TX frame to the + * AP. When queried in the disconnected state, this gives the last RIX used by + * the STA in the last TX frame to the AP when it was connected. + * + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TSF_OUT_OF_SYNC_COUNT: u32, used in STA + * mode only. This represents the number of times the STA TSF goes out of sync + * from the AP after the connection. If queried in the disconnected state, this + * gives the count of TSF out of sync for the last connection. + * + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_TRIGGER_REASON: u32, used in STA + * mode only. This represents the roam trigger reason for the last roaming + * attempted by the firmware. This can be queried either in connected state or + * disconnected state. Each bit of this attribute represents the different + * roam trigger reason code which are defined in enum qca_vendor_roam_triggers. + * + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON: u32, used in STA mode + * only. This represents the roam fail reason for the last failed roaming + * attempt by the firmware. Different roam failure reason codes are specified + * in enum qca_vendor_roam_fail_reasons. This can be queried either in + * connected state or disconnected state. + * + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON: u32, used in + * STA mode only. This represents the roam invoke fail reason for the last + * failed roam invoke. Different roam invoke failure reason codes + * are specified in enum qca_vendor_roam_invoke_fail_reasons. This can be + * queried either in connected state or disconnected state. */ enum qca_wlan_vendor_attr_get_sta_info { QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_INVALID = 0, @@ -10015,6 +10242,12 @@ enum qca_wlan_vendor_attr_get_sta_info { QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_MIC_ERROR_COUNT = 41, QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_REPLAY_COUNT = 42, QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE = 43, + QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_RATE = 44, + QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_RIX = 45, + QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TSF_OUT_OF_SYNC_COUNT = 46, + QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_TRIGGER_REASON = 47, + QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON = 48, + QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON = 49, /* keep last */ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST, |