diff options
| -rw-r--r-- | qcwcn/wpa_supplicant_8_lib/qca-vendor_copy.h | 449 |
1 files changed, 278 insertions, 171 deletions
diff --git a/qcwcn/wpa_supplicant_8_lib/qca-vendor_copy.h b/qcwcn/wpa_supplicant_8_lib/qca-vendor_copy.h index 8487f0d..ce588cc 100644 --- a/qcwcn/wpa_supplicant_8_lib/qca-vendor_copy.h +++ b/qcwcn/wpa_supplicant_8_lib/qca-vendor_copy.h @@ -1,37 +1,10 @@ /* * Qualcomm Atheros OUI and vendor specific assignments * Copyright (c) 2014-2017, Qualcomm Atheros, Inc. - * Copyright (c) 2018-2020, The Linux Foundation . All rights reserved. + * Copyright (c) 2018-2020, The Linux Foundation * - * This software may be distributed, used, and modified under the terms of - * BSD license: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name(s) of the above-listed copyright holder(s) nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This software may be distributed under the terms of the BSD license. + * See README for more details. */ #ifndef QCA_VENDOR_H @@ -539,7 +512,9 @@ enum qca_radiotap_vendor_ids { * @QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG: This command is used to * configure parameters per peer to capture Channel Frequency Response * (CFR) and enable Periodic CFR capture. The attributes for this command - * are defined in enum qca_wlan_vendor_peer_cfr_capture_attr. + * are defined in enum qca_wlan_vendor_peer_cfr_capture_attr. This command + * can also be used to send CFR data from the driver to userspace when + * netlink events are used to send CFR data. * * @QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT: Event to indicate changes * in throughput dynamically. The driver estimates the throughput based on @@ -731,6 +706,19 @@ enum qca_radiotap_vendor_ids { * configure the concurrent session policies when multiple STA interfaces * are (getting) active. The attributes used by this command are defined * in enum qca_wlan_vendor_attr_concurrent_sta_policy. + * + * @QCA_NL80211_VENDOR_SUBCMD_USABLE_CHANNELS: Userspace can use this command + * to query usable channels for different interface types such as STA, + * AP, P2P GO, P2P Client, NAN, etc. The driver shall report all usable + * channels in the response based on country code, different static + * configurations, concurrency combinations, etc. The attributes used + * with this command are defined in + * enum qca_wlan_vendor_attr_usable_channels. + * + * @QCA_NL80211_VENDOR_SUBCMD_GET_RADAR_HISTORY: This vendor subcommand is used + * to get DFS radar history from the driver to userspace. The driver + * returns QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_ENTRIES attribute with an + * array of nested entries. */ enum qca_nl80211_vendor_subcmds { QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0, @@ -918,6 +906,8 @@ enum qca_nl80211_vendor_subcmds { QCA_NL80211_VENDOR_SUBCMD_WIFI_FW_STATS = 195, QCA_NL80211_VENDOR_SUBCMD_MBSSID_TX_VDEV_STATUS = 196, QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY = 197, + QCA_NL80211_VENDOR_SUBCMD_USABLE_CHANNELS = 198, + QCA_NL80211_VENDOR_SUBCMD_GET_RADAR_HISTORY = 199, }; enum qca_wlan_vendor_attr { @@ -2451,6 +2441,13 @@ enum qca_wlan_vendor_attr_config { */ QCA_WLAN_VENDOR_ATTR_CONFIG_CONCURRENT_STA_PRIMARY = 79, + /* + * 8-bit unsigned value. This attribute can be used to configure the + * driver to enable/disable FT-over-DS feature. Possible values for + * this attribute are 1-Enable and 0-Disable. + */ + QCA_WLAN_VENDOR_ATTR_CONFIG_FT_OVER_DS = 80, + /* keep last */ QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST, QCA_WLAN_VENDOR_ATTR_CONFIG_MAX = @@ -4428,139 +4425,6 @@ enum qca_vendor_roam_invoke_fail_reasons { }; -/* - * enum qca_vendor_roam_fail_reasons: Defines the various roam - * fail reasons. This enum value is used in - * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON attribute. - * - * @QCA_ROAM_FAIL_REASON_SCAN_NOT_ALLOWED: Roam module in the firmware is not - * able to trigger the scan. - * @QCA_ROAM_FAIL_REASON_NO_AP_FOUND: No roamable APs found during roam scan. - * @QCA_ROAM_FAIL_REASON_NO_CAND_AP_FOUND: No candidate APs found during roam - * scan. - * @QCA_ROAM_FAIL_REASON_HOST: Roam fail due to disconnect issued from host. - * @QCA_ROAM_FAIL_REASON_AUTH_SEND: Unable to send Authentication frame. - * @QCA_ROAM_FAIL_REASON_AUTH_RECV: Received Authentication frame with error - * status code. - * @QCA_ROAM_FAIL_REASON_NO_AUTH_RESP: Authentication frame not received. - * @QCA_ROAM_FAIL_REASON_REASSOC_SEND: Unable to send Reassociation Request - * frame. - * @QCA_ROAM_FAIL_REASON_REASSOC_RECV: Received Reassociation Response frame - * with error status code. - * @QCA_ROAM_FAIL_REASON_NO_REASSOC_RESP: Reassociation Response frame not - * received. - * @QCA_ROAM_FAIL_REASON_SCAN_FAIL: Scan module not able to start scan. - * @QCA_ROAM_FAIL_REASON_AUTH_NO_ACK: No ACK is received for Authentication - * frame. - * @QCA_ROAM_FAIL_REASON_AUTH_INTERNAL_DROP: Authentication frame is dropped - * internally before transmission. - * @QCA_ROAM_FAIL_REASON_REASSOC_NO_ACK: No ACK is received for Reassociation - * Request frame. - * @QCA_ROAM_FAIL_REASON_REASSOC_INTERNAL_DROP: Reassociation Request frame is - * dropped internally. - * @QCA_ROAM_FAIL_REASON_EAPOL_M1_TIMEOUT: EAPOL-Key M1 is not received and - * times out. - * @QCA_ROAM_FAIL_REASON_EAPOL_M2_SEND: Unable to send EAPOL-Key M2 frame. - * @QCA_ROAM_FAIL_REASON_EAPOL_M2_INTERNAL_DROP: EAPOL-Key M2 frame dropped - * internally. - * @QCA_ROAM_FAIL_REASON_EAPOL_M2_NO_ACK: No ACK is received for EAPOL-Key - * M2 frame. - * @QCA_ROAM_FAIL_REASON_EAPOL_M3_TIMEOUT: EAPOL-Key M3 frame is not received. - * @QCA_ROAM_FAIL_REASON_EAPOL_M4_SEND: Unable to send EAPOL-Key M4 frame. - * @QCA_ROAM_FAIL_REASON_EAPOL_M4_INTERNAL_DROP: EAPOL-Key M4 frame dropped - * internally. - * @QCA_ROAM_FAIL_REASON_EAPOL_M4_NO_ACK: No ACK is received for EAPOL-Key M4 - * frame. - * @QCA_ROAM_FAIL_REASON_NO_SCAN_FOR_FINAL_BEACON_MISS: Roam scan is not - * started for final beacon miss case. - * @QCA_ROAM_FAIL_REASON_DISCONNECT: Deauthentication or Disassociation frame - * received from the AP during roaming handoff. - * @QCA_ROAM_FAIL_REASON_RESUME_ABORT: Firmware roams to the AP when the Apps - * or host is suspended and gives the indication of the last roamed AP only - * when the Apps is resumed. If the Apps is resumed while the roaming is in - * progress, this ongoing roaming is aborted and the last roamed AP is - * indicated to host. - * @QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID: WPA3-SAE invalid PMKID. - * @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT: WPA3-SAE pre-authentication times - * out. - * @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL: WPA3-SAE pre-authentication fails. - */ -enum qca_vendor_roam_fail_reasons { - QCA_ROAM_FAIL_REASON_NONE = 0, - QCA_ROAM_FAIL_REASON_SCAN_NOT_ALLOWED = 1, - QCA_ROAM_FAIL_REASON_NO_AP_FOUND = 2, - QCA_ROAM_FAIL_REASON_NO_CAND_AP_FOUND = 3, - QCA_ROAM_FAIL_REASON_HOST = 4, - QCA_ROAM_FAIL_REASON_AUTH_SEND = 5, - QCA_ROAM_FAIL_REASON_AUTH_RECV = 6, - QCA_ROAM_FAIL_REASON_NO_AUTH_RESP = 7, - QCA_ROAM_FAIL_REASON_REASSOC_SEND = 8, - QCA_ROAM_FAIL_REASON_REASSOC_RECV = 9, - QCA_ROAM_FAIL_REASON_NO_REASSOC_RESP = 10, - QCA_ROAM_FAIL_REASON_SCAN_FAIL = 11, - QCA_ROAM_FAIL_REASON_AUTH_NO_ACK = 12, - QCA_ROAM_FAIL_REASON_AUTH_INTERNAL_DROP = 13, - QCA_ROAM_FAIL_REASON_REASSOC_NO_ACK = 14, - QCA_ROAM_FAIL_REASON_REASSOC_INTERNAL_DROP = 15, - QCA_ROAM_FAIL_REASON_EAPOL_M1_TIMEOUT = 16, - QCA_ROAM_FAIL_REASON_EAPOL_M2_SEND = 17, - QCA_ROAM_FAIL_REASON_EAPOL_M2_INTERNAL_DROP = 18, - QCA_ROAM_FAIL_REASON_EAPOL_M2_NO_ACK = 19, - QCA_ROAM_FAIL_REASON_EAPOL_M3_TIMEOUT = 20, - QCA_ROAM_FAIL_REASON_EAPOL_M4_SEND = 21, - QCA_ROAM_FAIL_REASON_EAPOL_M4_INTERNAL_DROP = 22, - QCA_ROAM_FAIL_REASON_EAPOL_M4_NO_ACK = 23, - QCA_ROAM_FAIL_REASON_NO_SCAN_FOR_FINAL_BEACON_MISS = 24, - QCA_ROAM_FAIL_REASON_DISCONNECT = 25, - QCA_ROAM_FAIL_REASON_RESUME_ABORT = 26, - QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID = 27, - QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT = 28, - QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL = 29, -}; - -/* - * enum qca_vendor_roam_invoke_fail_reasons: Defines the various roam - * invoke fail reasons. This enum value is used in - * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON attribute. - * - * @QCA_ROAM_INVOKE_STATUS_IFACE_INVALID: Invalid interface ID is passed - * in roam invoke command. - * @QCA_ROAM_INVOKE_STATUS_OFFLOAD_DISABLE: Roam offload in firmware is not - * enabled. - * @QCA_ROAM_INVOKE_STATUS_AP_SSID_LENGTH_INVALID: Connected AP profile SSID - * length is invalid. - * @QCA_ROAM_INVOKE_STATUS_ROAM_DISALLOW: Firmware internal roaming is already - * in progress. - * @QCA_ROAM_INVOKE_STATUS_NON_ROAMABLE_AP: Host sends the Beacon/Probe Response - * of the AP in the roam invoke command to firmware. This reason is sent by the - * firmware when the given AP is configured to be ignored or SSID/security - * does not match. - * @QCA_ROAM_INVOKE_STATUS_ROAM_INTERNAL_FAIL: Roam handoff failed because of - * firmware internal reasons. - * @QCA_ROAM_INVOKE_STATUS_DISALLOW: Roam invoke trigger is not enabled. - * @QCA_ROAM_INVOKE_STATUS_SCAN_FAIL: Scan start fail for roam invoke. - * @QCA_ROAM_INVOKE_STATUS_START_ROAM_FAIL: Roam handoff start fail. - * @QCA_ROAM_INVOKE_STATUS_INVALID_PARAMS: Roam invoke parameters are invalid. - * @QCA_ROAM_INVOKE_STATUS_NO_CAND_AP: No candidate AP found to roam to. - * @QCA_ROAM_INVOKE_STATUS_ROAM_FAIL: Roam handoff failed. - */ -enum qca_vendor_roam_invoke_fail_reasons { - QCA_ROAM_INVOKE_STATUS_NONE = 0, - QCA_ROAM_INVOKE_STATUS_IFACE_INVALID = 1, - QCA_ROAM_INVOKE_STATUS_OFFLOAD_DISABLE = 2, - QCA_ROAM_INVOKE_STATUS_AP_SSID_LENGTH_INVALID = 3, - QCA_ROAM_INVOKE_STATUS_ROAM_DISALLOW = 4, - QCA_ROAM_INVOKE_STATUS_NON_ROAMABLE_AP = 5, - QCA_ROAM_INVOKE_STATUS_ROAM_INTERNAL_FAIL = 6, - QCA_ROAM_INVOKE_STATUS_DISALLOW = 7, - QCA_ROAM_INVOKE_STATUS_SCAN_FAIL = 8, - QCA_ROAM_INVOKE_STATUS_START_ROAM_FAIL = 9, - QCA_ROAM_INVOKE_STATUS_INVALID_PARAMS = 10, - QCA_ROAM_INVOKE_STATUS_NO_CAND_AP = 11, - QCA_ROAM_INVOKE_STATUS_ROAM_FAIL = 12, - -}; - /** * enum qca_vendor_attr_roam_candidate_selection_criteria: * @@ -4730,7 +4594,13 @@ enum qca_vendor_attr_roam_candidate_selection_criteria { * @QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD: Signed 32-bit value in dBm, * signifying the RSSI threshold of the candidate AP, indicating * the driver to trigger roam only to the candidate AP with RSSI - * better than this threshold. + * better than this threshold. If RSSI thresholds for candidate APs found + * in the 2.4 GHz, 5 GHz, and 6 GHz bands are configured separately using + * QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_2P4GHZ, + * QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_5GHZ, and/or + * QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_6GHZ, those values will + * take precedence over the value configured using the + * QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD attribute. * * @QCA_ATTR_ROAM_CONTROL_USER_REASON: Unsigned 32-bit value. Represents the * user defined reason code to be sent to the AP in response to AP's @@ -4749,6 +4619,31 @@ enum qca_vendor_attr_roam_candidate_selection_criteria { * If both QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME and * QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS are not specified, the * driver shall proceed with the default behavior. + * + * @QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_2P4GHZ: Signed 32-bit value + * in dBm, signifying the RSSI threshold of the candidate AP found in the + * 2.4 GHz band. The driver/firmware shall trigger roaming to the candidate + * AP found in the 2.4 GHz band only if its RSSI value is better than this + * threshold. Optional attribute. If this attribute is not included, the + * threshold value specified by the + * QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD attribute shall be used. + * + * @QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_5GHZ: Signed 32-bit value in + * dBm, signifying the RSSI threshold of the candidate AP found in the 5 + * GHz band. The driver/firmware shall trigger roaming to the candidate AP + * found in the 5 GHz band only if its RSSI value is better than this + * threshold. Optional attribute. If this attribute is not included, the + * threshold value specified by tge + * QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD attribute shall be used. + * + * @QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_6GHZ: Signed 32-bit value in + * dBm, signifying the RSSI threshold of the candidate AP found in the 6 + * GHz band. The driver/firmware shall trigger roaming to the candidate AP + * found in the 6 GHz band only if its RSSI value is better than this + * threshold. Optional attribute. If this attribute is not included, the + * threshold value specified by the + * QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD attribute shall be used. + * */ enum qca_vendor_attr_roam_control { QCA_ATTR_ROAM_CONTROL_ENABLE = 1, @@ -4764,6 +4659,9 @@ enum qca_vendor_attr_roam_control { QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD = 11, QCA_ATTR_ROAM_CONTROL_USER_REASON = 12, QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS = 13, + QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_2P4GHZ = 14, + QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_5GHZ = 15, + QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_6GHZ = 16, /* keep last */ QCA_ATTR_ROAM_CONTROL_AFTER_LAST, @@ -7679,6 +7577,21 @@ enum qca_wlan_he_om_ctrl_ch_bw { }; /** + * enum qca_wlan_keep_alive_data_type - Keep alive data type configuration + * + * Indicates the frame types to use for keep alive data. + * + * @QCA_WLAN_KEEP_ALIVE_DEFAULT: Driver default type used for keep alive. + * @QCA_WLAN_KEEP_ALIVE_DATA: Data frame type for keep alive. + * @QCA_WLAN_KEEP_ALIVE_MGMT: Management frame type for keep alive. + */ +enum qca_wlan_keep_alive_data_type { + QCA_WLAN_KEEP_ALIVE_DEFAULT = 0, + QCA_WLAN_KEEP_ALIVE_DATA = 1, + QCA_WLAN_KEEP_ALIVE_MGMT = 2, +}; + +/** * enum qca_wlan_vendor_attr_he_omi_tx: Represents attributes for * HE operating mode control transmit request. These attributes are * sent as part of QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX and @@ -8191,6 +8104,22 @@ enum qca_wlan_vendor_attr_wifi_test_config { */ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_6GHZ_SECURITY_TEST_MODE = 51, + /* 8-bit unsigned value to configure the driver to transmit data with + * ER SU PPDU type. + * + * 0 - Default behavior, 1 - Enable ER SU PPDU type TX. + * This attribute is used for testing purposes. + */ + QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ER_SU_PPDU_TYPE = 52, + + /* 8-bit unsigned value to configure the driver to use Data or + * Management frame type for keep alive data. + * Uses enum qca_wlan_keep_alive_data_type values. + * + * This attribute is used for testing purposes. + */ + QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_KEEP_ALIVE_FRAME_TYPE = 53, + /* keep last */ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST, QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX = @@ -8599,14 +8528,17 @@ enum qca_wlan_twt_setup_state { * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAC_ADDR: 6-byte MAC address * Represents the MAC address of the peer for which the TWT session * is being configured. This is used in AP mode to represent the respective - * client. In AP mode, this is an optional parameter for response and is - * a required parameter for - * 1. TWT SET Request - * 2. TWT GET Request - * 3. TWT TERMINATE Request - * 4. TWT SUSPEND Request + * client. + * In AP mode, this is a required parameter in response for + * 1. TWT SET + * 2. TWT GET + * 3. TWT TERMINATE + * 4. TWT SUSPEND * In STA mode, this is an optional parameter in request and response for * the above four TWT operations. + * In AP mode, this is a required parameter in request for + * 1. TWT GET + * 2. TWT TERMINATE * * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MIN_WAKE_INTVL: Optional (u32) * Minimum tolerance limit of wake interval parameter in microseconds. @@ -9110,6 +9042,22 @@ enum qca_wlan_vendor_attr_roam_scan { }; /** + * enum qca_wlan_vendor_cfr_data_transport_modes - Defines QCA vendor CFR data + * transport modes and is used by the attribute + * QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE as a part of the vendor + * command QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG. + * @QCA_WLAN_VENDOR_CFR_DATA_RELAY_FS: Use relayfs to send CFR data. + * @QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS: Use netlink events to send CFR + * data. The data shall be encapsulated within + * QCA_WLAN_VENDOR_ATTR_PEER_CFR_RESP_DATA along with the vendor sub command + * QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG as an asynchronous event. + */ +enum qca_wlan_vendor_cfr_data_transport_modes { + QCA_WLAN_VENDOR_CFR_DATA_RELAY_FS = 0, + QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS = 1, +}; + +/** * enum qca_wlan_vendor_cfr_method - QCA vendor CFR methods used by * attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD as part of vendor * command QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG. @@ -9299,6 +9247,27 @@ enum qca_wlan_vendor_cfr_capture_type { * MAC for CFR capture. This is a bitmask in which each bit represents the * corresponding Data frame subtype value per IEEE Std 802.11-2016, * 9.2.4.1.3 Type and Subtype subfields. This is for CFR version 2 only. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE: Optional (u8) + * Userspace can use this attribute to specify the driver about which transport + * mode shall be used by the driver to send CFR data to userspace. Uses values + * from enum qca_wlan_vendor_cfr_data_transport_modes. When this attribute is + * not present, the driver shall use the default transport mechanism which is + * QCA_WLAN_VENDOR_CFR_DATA_RELAY_FS. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_RECEIVER_PID: Optional (u32) + * Userspace can use this attribute to specify the nl port id of the application + * which receives the CFR data and processes it further so that the drivers can + * unicast the netlink events to a specific application. Optionally included + * when QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE is set to + * QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS, not required otherwise. The drivers + * shall multicast the netlink events when this attribute is not included. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_RESP_DATA: Required (NLA_BINARY). + * This attribute will be used by the driver to encapsulate and send CFR data + * to userspace along with QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG as an + * asynchronous event when the driver is configured to send CFR data using + * netlink events with %QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS. */ enum qca_wlan_vendor_peer_cfr_capture_attr { QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_INVALID = 0, @@ -9327,6 +9296,9 @@ enum qca_wlan_vendor_peer_cfr_capture_attr { QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER = 23, QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER = 24, QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER = 25, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE = 26, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_RECEIVER_PID = 27, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_RESP_DATA = 28, /* Keep last */ QCA_WLAN_VENDOR_ATTR_PEER_CFR_AFTER_LAST, @@ -10978,4 +10950,139 @@ enum qca_sta_connect_fail_reason_codes { QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_RESP_RECEIVED = 7, }; +/** + * enum qca_wlan_vendor_usable_channels_filter - Bitmask of different + * filters defined in this enum are used in attribute + * %QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_FILTER_MASK. + * + * @QCA_WLAN_VENDOR_FILTER_CELLULAR_COEX: When this bit is set, the driver + * shall filter the channels which are not usable because of coexistence with + * cellular radio. + * @QCA_WLAN_VENDOR_FILTER_WLAN_CONCURRENCY: When this bit is set, the driver + * shall filter the channels which are not usable because of existing active + * interfaces in the driver and will result in Multi Channel Concurrency, etc. + * + */ +enum qca_wlan_vendor_usable_channels_filter { + QCA_WLAN_VENDOR_FILTER_CELLULAR_COEX = 0, + QCA_WLAN_VENDOR_FILTER_WLAN_CONCURRENCY = 1, +}; + +/** + * enum qca_wlan_vendor_attr_chan_info - Attributes used inside + * %QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_CHAN_INFO nested attribute. + * + * @QCA_WLAN_VENDOR_ATTR_CHAN_INFO_PRIMARY_FREQ: + * u32 attribute, required. Indicates the center frequency of the primary + * channel in MHz. + * + * @QCA_WLAN_VENDOR_ATTR_CHAN_INFO_SEG0_FREQ: + * u32 attribute. Indicates the center frequency of the primary segment of the + * channel in MHz. This attribute is required when reporting 40 MHz, 80 MHz, + * 160 MHz, and 320 MHz channels. + * + * @QCA_WLAN_VENDOR_ATTR_CHAN_INFO_SEG1_FREQ: + * u32 attribute. Indicates the center frequency of the secondary segment of + * 80+80 channel in MHz. This attribute is required only when + * QCA_WLAN_VENDOR_ATTR_CHAN_INFO_BANDWIDTH is set to NL80211_CHAN_WIDTH_80P80. + * + * @QCA_WLAN_VENDOR_ATTR_CHAN_INFO_BANDWIDTH: + * u32 attribute, required. Indicates the bandwidth of the channel, possible + * values are defined in enum nl80211_chan_width. + * + * @QCA_WLAN_VENDOR_ATTR_CHAN_INFO_IFACE_MODE_MASK: + * u32 attribute, required. Indicates all the interface types for which this + * channel is usable. This attribute encapsulates bitmasks of interface types + * defined in enum nl80211_iftype. + * + */ +enum qca_wlan_vendor_attr_chan_info { + QCA_WLAN_VENDOR_ATTR_CHAN_INFO_INVALID = 0, + QCA_WLAN_VENDOR_ATTR_CHAN_INFO_PRIMARY_FREQ = 1, + QCA_WLAN_VENDOR_ATTR_CHAN_INFO_SEG0_FREQ = 2, + QCA_WLAN_VENDOR_ATTR_CHAN_INFO_SEG1_FREQ = 3, + QCA_WLAN_VENDOR_ATTR_CHAN_INFO_BANDWIDTH = 4, + QCA_WLAN_VENDOR_ATTR_CHAN_INFO_IFACE_MODE_MASK = 5, + + /* keep last */ + QCA_WLAN_VENDOR_ATTR_CHAN_INFO_AFTER_LAST, + QCA_WLAN_VENDOR_ATTR_CHAN_INFO_MAX = + QCA_WLAN_VENDOR_ATTR_CHAN_INFO_AFTER_LAST - 1, +}; + +/** + * enum qca_wlan_vendor_attr_usable_channels - Attributes used by + * %QCA_NL80211_VENDOR_SUBCMD_USABLE_CHANNELS vendor command. + * + * @QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_BAND_MASK: + * u32 attribute. Indicates the bands from which the channels should be reported + * in response. This attribute encapsulates bit masks of bands defined in enum + * nl80211_band. Optional attribute, if not present in the request the driver + * shall return channels from all supported bands. + * + * @QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_IFACE_MODE_MASK: + * u32 attribute. Indicates all the interface types for which the usable + * channels information is requested. This attribute encapsulates bitmasks of + * interface types defined in enum nl80211_iftype. Optional attribute, if not + * present in the request the driver shall send information of all supported + * interface modes. + * + * @QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_FILTER_MASK: + * u32 attribute. This attribute carries information of all filters that shall + * be applied while populating usable channels information by the driver. This + * attribute carries bit masks of different filters defined in enum + * qca_wlan_vendor_usable_channels_filter. Optional attribute, if not present + * in the request the driver shall send information of channels without applying + * any of the filters that can be configured through this attribute. + * + * @QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_CHAN_INFO: + * Nested attribute. This attribute shall be used by the driver to send + * usability information of each channel. The attributes defined in enum + * qca_wlan_vendor_attr_chan_info are used inside this attribute. + */ +enum qca_wlan_vendor_attr_usable_channels { + QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_INVALID = 0, + QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_BAND_MASK = 1, + QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_IFACE_MODE_MASK = 2, + QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_FILTER_MASK = 3, + QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_CHAN_INFO = 4, + + /* keep last */ + QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_AFTER_LAST, + QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_MAX = + QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_AFTER_LAST - 1, +}; + +/** + * enum qca_wlan_vendor_attr_radar_history: Used by the vendor command + * QCA_NL80211_VENDOR_SUBCMD_GET_RADAR_HISTORY to get DFS radar history. + * + * @QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_ENTRIES: Nested attribute to carry + * the list of radar history entries. + * Each entry contains freq, timestamp, and radar signal detect flag. + * The driver shall add an entry when CAC has finished, or radar signal + * has been detected post AP beaconing. The driver shall maintain at least + * 8 entries in order to save CAC result for a 160 MHz channel. + * @QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_FREQ: u32 attribute. + * Channel frequency in MHz. + * @QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_TIMESTAMP: u64 nanoseconds. + * CLOCK_BOOTTIME timestamp when this entry is updated due to CAC + * or radar detection. + * @QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_DETECTED: NLA_FLAG attribute. + * This flag indicates radar signal has been detected. + */ +enum qca_wlan_vendor_attr_radar_history { + QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_INVALID = 0, + + QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_ENTRIES = 1, + QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_FREQ = 2, + QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_TIMESTAMP = 3, + QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_DETECTED = 4, + + /* keep last */ + QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_LAST, + QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_MAX = + QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_LAST - 1, +}; + #endif /* QCA_VENDOR_H */ |